Windows 10: Pc wont go on

I recently tried to insert my SSD into a pc that couldn't go on but when I brought the SSD and put it back into mine. It could go on and saying error 2102 and I even tried to reinstall windows but when I reached the part on selecting the drive onto which windows were to be installed it couldn't be read

:)

 

PC shut down, wont turn back on

The fan twitch is it powering up and then the psu is noteing a short and cutting out hence why it wont do it again straight after until it's reset, something is blown or shorted out so you need to do as someone suggested and split the pc out then, on a table build the minimum up as he said and step by step see what's happening.

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it