Windows 10: PCIe USB 3.0 Card detected then undetected in looping by Windows

Bought an extension USB 3.0 PCIe x1 card, with 6 ports, 1 USB-C, and 4 USB-A, with another USB-A on the rear of the card, inside the case.But, even after installing the drivers from the small CD that came with it, the card is on a loop being recognized and then unrecognized on the computer, making it unusable and the windows "hardware removed sound" plays every time it stops being recognized. The only things connected to it are an Bluetooth 5.4 adapter from UGREEN and an Xbox One controller wired thru micro-usb UGREEN cable too on the USB-A port of the card. Are there any way to fix the is

:)

 

I bought a pcie 3.0 card and it's not being detected!

So i bought a wmr headset, i needed usb 3.0 so i bought a hub, i installed it, pcie along with the power connecting to it, and it's not being detected at all! this is the usb 3.0 hub i bought to be exact https://www.ebay.co.uk/itm/DYNAMODE...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649 I
tried installing drivers but it still wasn't detected!

 

Renesas USB 3 PCIe NEC uPD720201 not detecting USB stick

I installed Renesas PCIe USB 3 card in my PC with windows 10 pro, it was detected by windows and look working OK, when I upgrade my windows 10 to the creator version, I noted the card can still present in the device manger but it is not detecting USB sticks
or any external USB connected to it?I tried to update driver from the internet but windows search shows that the best driver is already installed for this device!

Is this driver issue or incompatibility with windows?

Any help is very much appreciated.

Thank you

 

LPT PCIe card sometimes not detected at all in Windows 10

I have an ASRock Z170 Pro4 LGA 1151 motherboard, and a RC-302E PCIe 1-Port Parallel Card connected. I am running Windows 10 Professional.

I'm having an issue with the parallel port card where sometimes it just will not show up in Device Manager at all. As in, there is no "unknown device" listed, the device is just completely absent. It doesn't matter if I hit "Scan for new hardware" or not, it doesn't show up.

Sometimes on a cold boot I will see the LPT port registered in device manager and working fine. Sometimes it is just missing altogether. Sometimes it is there at first, and disappears after a while.

Reinstalling the drivers is not the solution, as I've done this several times (and I can't install the drivers if the system thinks the device doesn't exist to begin with).

I was hoping that the solution would be similar to this question, but I have two USB PCIe cards that connect to the power supply which work fine, meanwhile the parallel port card does not connect to the power supply.

I don't know what to do to get it to just work, having to reboot several times just to see if it will work is very disruptive.