Windows 10: Permanent solution for driver signature enforcement no audio output

I've had the No audio output where the audio icon has a red cross problem for a long time. Here's what I tried to do to fix it:- Deleted the audio driver so it would automatically download again- Updated audio driver in Device Manager- Downloaded drivers from the web and installed itSo far, nothing has permanently solved my problem. The error code I get in Device Manager is 52: Windows cannot verify the digital signature for the drivers required for this device.I'm running out of ideas on how to solve this. The only temporary solution I've found is to disable driver signature in st

:)

 

disable driver signature enforcement

Hi Barbara,

To resolve this issue, let's use the command prompt to disable driver signature enforcement permanently on your computer. To disable, follow the steps below:

• Click the Start button.
• On the search bar, type Command Prompt and then right-click
  Command Prompt in the results.
• Select Run as Administrator, and then select Yes.
• On the command prompt, enter bcdedit.exe /set nointegritychecks on and press
  Enter.
• Restart your computer.

Note: Doing this step will disable driver signature enforcement permanently and will make your computer vulnerable to driver issues.

Keep us updated with the results.

 

How to disable driver signature enforcement permenently.

Hi Ashan,

Driver Signature Enforcement is one of the security features that we make to make sure that only signed drivers can load on your system. Take note that disabling driver signature enforcement will install drivers that weren’t officially signed. To disable
driver signature enforcement permanently, you can follow the steps below:

• Open an elevated Command Prompt. To do this, press the Windows
  key, type Command Prompt, press right click on the
  Command Prompt and select Run
  as administrator.
• Type or paste the following:
  
  bcdedit.exe /set nointegritychecks on
  
• Restart your computer.

If you want to enable the driver signature enforcement, just follow the steps above and type or paste the following:

bcdedit.exe /set nointegritychecks off

Should you need further assistance, don't hesitate to get back to us.

 

How to disable driver signature enforcement permenently.

I does you solution in cmd admin mode. but not correct this problem. Hasp key is not work. Cmd command not work an i was tired. Its work only disable driver signature enforcement mode .. how can
i fix this ? Help me...