Windows 10: Photo format issue

I have downloaded raw images in a zip file and then extract them but now when i try to open these pictures it show that sorry, photos cannot open these images because the file format is not supported or may be coruppted. What should i do to solve this problem please guid me as soon as possible.

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

photo viewer

Hi,

There are several reasons why this issue occurs, such as corrupted system file or your graphic driver needs to be updated. To isolate your issues about viewing photos in
Windows Photo Viewer, we just have a few questions:

• Is the issue the same with a different image file format?
• Have you tried using the Photo app to check if the issue is the same?
• Is the issue only occurs with the photos that were captured using your DSLR camera?
• Have you tried downloading photos online and check if the issue is the same?
• What troubleshooting steps have you done so far?

In the meantime, to troubleshoot your issue in using the Windows Photo Viewer, we suggest that you run the Windows apps troubleshooter. To do so, click on this
link. If the issue still persists, we recommend that you update your graphic driver. To do this, we suggest that you follow the steps provided on this
link.

Please post back with the result for further assistance.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.