Windows 10: Please Help me with BSOD with DRIVER_POWER_STATE_FAILURE - 0x0000009f - 00000000`00000003 -...

Dear Microsoft Community,lately I have been having an Issue with the following error resulting in a BSOD:String: DRIVER_POWER_STATE_FAILUREBug Check Code: 0x0000009fPar1: 00000000`00000003Caused by Driver: ntoskrnl.exeCaused by Address: ntoskrnl.exe+416000The BSOD happens when I turn my Laptop on and log in, usually after around a minute, then my Laptop reboots and it works afterwards without further complications. Or when it is suspended it happens again :cPLEASE HELP ME!!!!

:)

 

Please Help me with BSOD with DRIVER_POWER_STATE_FAILURE - 0x0000009f - 00000000`00000003 - ntoskrnl.exe

Dear Microsoft Community,

lately I have been having an Issue with the following error resulting in a BSOD:

String: DRIVER_POWER_STATE_FAILURE
Bug Check Code: 0x0000009f
Par1: 00000000`00000003
Caused by Driver: ntoskrnl.exe

Caused by Address: ntoskrnl.exe+416b40

The BSOD happens when I turn my Laptop on and log in, usually after around a minute, then my Laptop reboots and it works afterwards without further complications.

It is still annoying since it happens every day and is probably harmful to the Laptop as well, right?
I already checked the device manager and it does not highlight any Driver as having an issue.

Since there is also no update necessary, I really do not know what exactly is causing this issue and need help.

I uploaded the .dmp file on GoogleDrive:

https://drive.google.com/file/d/1g0JaiaE2L8dpJCaFrJU-nq452O82O61R/view?usp=sharing

Thank You all very much for your help!

Best Regards,
Asaster

----------------------------------------------------------------

 

BSOD DRIVER_POWER_STATE_FAILURE 0x0000009f

Hi,

I've got BSOD when cold start the computer.

Computer is DELL Alienware Aurora R8.

I already open a support case at DELL support.

All drivers, chipsets and BIOS are up-to-date.

Windows 10 ver 1909 (18363.693) is up-to-date

Graphics pilotes are up-to-date too.

Here is one of the BSOD bugcheck :

DRIVER_POWER_STATE_FAILURE 0x0000009f 00000000`00000003
ffffa883`f671c080 ffffef8f`28a77c00 ffffa883`f6c14010
ntoskrnl.exe ntoskrnl.exe+1c1510 NT Kernel & System
Microsoft® Windows® Operating System Microsoft Corporation
10.0.18362.693 (WinBuild.160101.0800) x64 ntoskrnl.exe+1c1510
C:\Windows\Minidump\030420-38375-01.dmp 6 15
18362 1,443,228 2020-03-04 18:56:23

It's always DRIVER_POWER_STATE_FAILURE 0x0000009f

I'va done advanced analyse with Driver Verifier and WinDbg (Windows Debugger).

The WinDbg report invokes xusb22.sys

The WinDbg report is available here : PasteChaprilOrg

The Driver Verifier report is available here : PasteChaprilOrg

The minidump file is available here : Mailo

If I correctly understood, when the PC boot with bluetooth enable, it try to connect to the gamepad controller but crash with "A device object has been blocking an Irp for too long a time". No problem when boot with bluetooth disable.

Help will be appreciated

Regards

 

Please Help me with BSOD with DRIVER_POWER_STATE_FAILURE - 0x0000009f

Hello!

I keep getting a BSOD every couple of hours and it's starting to get annoying. I took a look at the dump files and tried resolving this myself and first thought it was my display adapter that was causing that but it turns out it isn't. I recently upgraded most of my drivers but can't determine what the problem is. Here are the dump files:
Bug Check String: DRIVER_POWER_STATE_FAILURE
Bug Check Code: 0x0000009f
Parameter 1: 00000000`00000003
Parameter 2: ffff9587`bf759d70
Parameter 3: ffffb883`ab23e7f8
Parameter 4: ffff9587`c3e9d810
Caused by driver: ntoskrnl.exe
Caused by address: ntoskrnl.exe+41a240+41a240

Note: I am on an IdeaPad 1-15ADA7 Laptop - Type 82R1 and I updated all my drivers from the Lenevo website.

Any help is appreciated!