Windows 10: Please Help me with BSOD with DRIVER_POWER_STATE_FAILURE - 0x0000009f - 00000000`00000003 -...

Dear Microsoft Community,lately I have been having an Issue with the following error resulting in a BSOD:String: DRIVER_POWER_STATE_FAILUREBug Check Code: 0x0000009fPar1: 00000000`00000003Caused by Driver: ntoskrnl.exeCaused by Address: ntoskrnl.exe+416b40The BSOD happens when I turn my Laptop on and log in, usually after around a minute, then my Laptop reboots and it works afterwards without further complications.It is still annoying since it happens every day and is probably harmful to the Laptop as well, right?I already checked the device manager and it does not highlight any Driver as havi

:)

 

BSOD DRIVER_POWER_STATE_FAILURE 0x0000009f

Hi,

I've got BSOD when cold start the computer.

Computer is DELL Alienware Aurora R8.

I already open a support case at DELL support.

All drivers, chipsets and BIOS are up-to-date.

Windows 10 ver 1909 (18363.693) is up-to-date

Graphics pilotes are up-to-date too.

Here is one of the BSOD bugcheck :

DRIVER_POWER_STATE_FAILURE 0x0000009f 00000000`00000003
ffffa883`f671c080 ffffef8f`28a77c00 ffffa883`f6c14010
ntoskrnl.exe ntoskrnl.exe+1c1510 NT Kernel & System
Microsoft® Windows® Operating System Microsoft Corporation
10.0.18362.693 (WinBuild.160101.0800) x64 ntoskrnl.exe+1c1510
C:\Windows\Minidump\030420-38375-01.dmp 6 15
18362 1,443,228 2020-03-04 18:56:23

It's always DRIVER_POWER_STATE_FAILURE 0x0000009f

I'va done advanced analyse with Driver Verifier and WinDbg (Windows Debugger).

The WinDbg report invokes xusb22.sys

The WinDbg report is available here : PasteChaprilOrg

The Driver Verifier report is available here : PasteChaprilOrg

The minidump file is available here : Mailo, der E-Mail-Service, der Sie respektiert

If I correctly understood, when the PC boot with bluetooth enable, it try to connect to the gamepad controller but crash with "A device object has been blocking an Irp for too long a time". No problem when boot with bluetooth disable.

Help will be appreciated

Regards

 

DRIVER_POWER_STATE_FAILURE ntoskrnl.exe bsod 0x0000009f when hibernating or sleeping

So every now and then when I put my system to sleep or hibernate, my system stays on with a black screen and will not shut down unless I power off or reset button. Then it boots up as a crash and it shows I had a bsod in the logs.

dmp upload: 103018-21390-01.zip

 

BSOD DRIVER_POWER_STATE_FAILURE 0x0000009f

Currently getting the below BSOD. Looking for assistance in pinpointing the problem. I have been told that the hard drive functions in other computers but have been unable to verify if this is true or not.

==================================================

Dump File : 082317-24000-01.dmp

Crash Time : 8/23/2017 11:14:48 PM

Bug Check String : DRIVER_POWER_STATE_FAILURE

Bug Check Code : 0x0000009f

Parameter 1 : 00000000`00000004

Parameter 2 : 00000000`0000012c

Parameter 3 : ffffe000`2931f800

Parameter 4 : ffffd000`adf469b0

Caused By Driver : ntoskrnl.exe

Caused By Address : ntoskrnl.exe+147486

File Description : NT Kernel & System

Product Name : Microsoft® Windows® Operating System

Company : Microsoft Corporation

File Version : 10.0.10586.1007 (th2_release.170706-2002)

Processor : x64

Crash Address : ntoskrnl.exe+147486

Stack Address 1 :

Stack Address 2 :

Stack Address 3 :

Computer Name :

Full Path : C:\windows\Minidump\082317-24000-01.dmp

Processors Count : 4

Major Version : 15

Minor Version : 10586

Dump File Size : 330,940

Dump File Time : 8/23/2017 11:16:49 PM

==================================================