Windows 10: Please Help Why is windows showing that the battery is 106%

I have an Asus laptop and today I ran the powercfg/batteryreport command in cmd to check battery information.The battery report said CAPACITY REMAINING is 106%. The laptop battery type is a lithium ion-based battery LION which normally does not overcharge as I know. What I know is that with lithium ion-based batteries, when the battery is full, the laptop starts taking energy directly from the AC energy source and not from the battery, and at the same time the battery does not get more energy. I sometimes use the laptop while it is plugged in. Today I checked the battery report shortly befor

:)

 

BH-106 with Windows 7

Is it possible to use BH-106 as a head phone in windows 7? I manage to pair it but in device manager it is showing as blue tooth peripheral device and drivers are not installed. I check but did not find any drivers on the internet. Any suggestions?

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

GPU-Z what command line parameter ?

Suggestion: /? (-?) and /help (-help) command-line arguments to show a list of all possible arguments in a small window. *Smile