Windows 10: Please Insert Boot Device error first time starting the PC but everything normal after restart

After I got a new video card, my pc now has this error When I start the PC up after shutting it down using Windows Shut Down option it starts and then "Please insert boot device" error shows up, after pressing the restart option on my PC Tower the PC starts, with a - converting to _ and then the PC starts normally with the Windows logoHow do I solve this? I checked my BIOS and the Drive with the OS I use to boot my PC is the 1st in the priority list, followed by the other disks I have which none has an OS installedPD: My video card went from RX460 to GTX 1660 and uses hdmi instead of VGAThe

:)

 

Unable to boot the device with error: 0xc0000428 on Windows 10

Hi Vuk,

Thank you for posting in Microsoft Community and being part of Windows 10.

I understand the inconvenience you are facing in booting the device with 0xc0000428 error. We will help you with this issue.

Do let us know the following to assist you better with this issue:

• What is the make and model of your device?
• What is the complete error message along with the error code of this issue?
• From when are you facing this issue?
• Have you make any hardware/ software changes to your device prior to this issue?

I would like to inform that when you attempt to start a Windows 10 system, the system fails to start normally and you receive an error:
0xc0000428 for the signed driver dlkmdldr.sys. Do confirm us if you are facing the same issue.

Try the below and check if it helps.

Step 1: I suggest you to remove all the external devices except mouse and keyboard, hard reboot the device and check if the issue persists.

Step 2: I suggest you to boot the device by choosing the "Disable Driver Signature Enforcement" mode from the advanced boot menu, you would be able to boot the system to the desktop.

• Try to boot the device to Windows Recovery Environment
• Click on Advanced options, Startup Settings
  and Restart.
• Once the computer restarts, press F7 key to start he device on
  Disable Driver Signature Enforcement mode.
• Check if the computer boot successfully.

Step 3: I suggest you to install the pending updates on your device after restarting the computer.

Steps:

• Connect to the internet.
• Press Windows key and type
  updates.
• Click on Check for updates.
• Under Windows Updates, click on
  Check for updates.
• Try to install the updates being shown.

Hope it helps. Try the above an update us the status of this issue to assist you further accordingly.

 

Reboot and Select proper boot device or insert boot media in selected boot device

I start my computer but my screen isnt showing any options its just blank and i cant do anything

 

Reboot and Select proper boot device or insert boot media in selected boot device

Hi Ryan,

Thank you for contacting Microsoft Community.

Have you installed the OS after changing the hard drive?

If you have and if you are still getting this error message, I would suggest you to go to BIOS and set the right boot order.

I suggest you to download the Windows 10 ISO and create a Media Creation tool from different computer and then perform Automatic Repair.

Refer to the following link:

http://www.microsoft.com/en-us/software-download/windows10

(Refer to the section "Installing Windows 10 using the media creation tool " in the above article
for creating the tool).

Once you have the installation media, follow the steps:

• Start your computer from the installation media. Insert the disk or USB stick and restart your computer. If you see a message asking you to “Press any key to boot from DVD,” do so. If you don’t see the message, you might need to
  change the boot order in your computer's BIOS settings so that it first starts from the disk or USB. When you see the 'Install Windows' page, tap or click 'Repair your computer' link to start the Windows Recovery Environment.
• In the Windows Recovery Environment, on the Choose an option screen, click 'Troubleshoot'.
• Click, Advanced Options and then click on 'Automatic Repair'.
• After this complete the repair and see if you are able to boot in to your computer.

If the issue still persists, I would suggest you to try boot rec commands from winRE

To run Startup Repair from the Windows Recovery Environment (WinRE), follow these steps:

1. Insert the Windows installation disc into the disc drive, and then start the computer.

2. Press a key when the message Press any key to boot from CD or DVD appears.

If your PC does not detect the media automatically

• During the restart process, read the screen for any instructions that explain how to interrupt normal startup and enter the basic input/output system (BIOS) setup utility. Most PCs use the F2, F10, ESC, or DEL key to begin the
  BIOS Setup.
• Look for a tab in the BIOS Setup Utility that is labeled
  Boot Order, Boot Options, or
  Boot. Following the directions on the screen, use the arrow keys to go to the
  Boot Order, then press Enter.
• Locate the CD, DVD, or USB flash drive (this might be called Removable Device) in the Boot list. Following the directions on the screen, use the arrow keys to move the drive up so that it appears first in the Boot list. Press Enter.
  The boot order sequence is now changed to boot from the CD, DVD, or USB flash drive.
• Press F10 to save your changes and to exit the BIOS Setup Utility. Select
  Yes in the confirmation window. The PC will restart.
  

3. Select a language, a time and a currency, a keyboard or input method, and then click
Next.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, select the drive of your Windows installation, and then click
Next.

6. At the System Recovery Options dialog box, click
Repair your computer.

7. Click the operating system that you want to repair, and then click
Next.

8. In the System Recovery Options dialog box, click
Startup Repair.

Hope this information was helpful and do let us know if you need further assistance. We will be glad to assist.