Windows 10: Possible bad drivers

Hey guys,


I've been getting quite alot of bluescreens for a while now since I built this computer in January this year. I've been doing alot of troubleshooting using Memtest and Intel Diagnostic tool for CPU.


I found a thread https://answers.microsoft.com/en-us...behaving/f5cb4faf-556b-4b6d-95b3-c48669e4c983 on how to use Verifier for testing bad drivers so I did that today after getting a bluescreen this morning. After using Verifier I got another bluescreen and when I tried to start up my computer I kept getting bluescreens making me unable to start the computer, forcing me into go to CMD from repair tool and enable safe booting with network which I'm in at now.


I posted my minidump files into my drive and wonder if anyone can analyze them to possibly see if there is something wrong with any driver. Here is the link to the zipped dumps:

https://drive.google.com/file/d/1cNuUH6SsbPkX1B49-_oe2SHlY-BVZ9ef/view?usp=sharing


Best regards,

Robin

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Bad driver to DVD-player

Hi,

The issue might cause if the drivers are not updated. So, I suggest you to update the driver software by following the steps provided below and check if it helps.

• Press “Windows key + R” type “devmgmt.msc” and press
  Enter.
• Right click on DVD/CD Roms from the list and select
  properties.
• Under Driver tab click on Update button and follow the prompts to update the driver.

If the issue still persists, download the latest drivers from the manufacturer and install the same.

Hope this helps. Keep us posted on the status for further assistance.

 

Bad Resoluton

Hi,

Thank you for posting in Microsoft Community.

I suggest you to uninstall and reinstall the drivers once again and check if it helps.

If the issue still persists, I recommend you to reinstall the display drivers in compatibility mode.

Refer the steps to install a driver in compatibility mode:

• 
  Right click on the setup file of the driver and select
  Properties
  
• 
  Select Compatibility Tab
  
• 
  Place a check mark next to Run this program in Compatibility mode and select the operating system accordingly from the drop down list.
  
• 
  Let the driver to install and then check the functionality.
  

Hope it helps.

Please reply to the status of the issue.

Thanks.