Windows 10: Possible HD failure

I installed a new 1 GB SSD in an HP laptop ;ess than three months ago. A couple of times recently Windows 11 has crashed with a BSOD, and when I restarted the laptop would not boot up, giving me a boot device not found error message, and refused to boot. Several attempts resulted in no luck. I finally went into the BIOS, opened the boot manager, changed the UEFI boot device to an external device then changed it back to the hard drive without actually saving in between, exited the BIOS and rebooted and the machine rebooted, albeit very slowly with a long hiccup after the logon screen appeared a

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

hd6950 to hd 6970

ok
i ve tried everything:with atiflash from dos,winflash.step by step with bios powercolor hd 6970 from the database.
nothing,doesn´t work.any suggestion????

 

Cannot Format HD


Need to initialize it as GPT disk type with HD > 2TB:
From Admin command prompt:

1. diskpart
2. list disk =====> Take a note of disk # for the 4TB HD
3. select disk # ====> From step 2
4. clean
5. exit

Open Disk Management and initialize the disk as GPT, create simple then format.