Windows 10: Power on problem

I recently gave my old PC to my grand-daughter who does not live with me. when she trys to switch the PC on it will not power up until she tilts the box. Today I took the side of the tower off and successfully started the PC a number of times however when I replaced the side the problem returned. The processor fan pulses as if the power is getting through and the only way to start the PC is by tilting the unit forward and pressing the power button.


The PC is an Advent DT 2410 Desktop unit running Windows 10.

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Windows 10 1709 System Restore problems...


That seems to be an attempt at Option 2 in the tutorial, which requires you to
a. Boot to a command prompt (Did you?)
b. You then seem to be mixing steps 3,4 and 5, thus your command is incorrect.

I suggest Option 1 is easier.

If you still have problems, please repost listing each specific step and saying which option from the tutorial you are using. Thanks.

 

Lost Power, now PC won't boot. Powers on and clicks.


I had tried both of those steps. Neither worked. I have a replacement power supply on order. Should be here on Monday. Thanks for the suggestions.