Windows 10: Power State Failure BSOD on a freshly installed Windows 10 PC

Hi folks,


I have recently changed my local Disk drive type from SATA SSD to an NVME M.2 Samsung 970 EVO plus with a fresh Windows 10 install. For some reason I keep on getting sporadic BSOD error "Power State Failure" whenever I either try to shutdown my PC or during the first 5 mins after booting up Windows.


I tried switching power plans from "balanced" to High Power" but to no avail as the BSOD error persisted. I have a dump file available but I am not sure if that will help troubleshoot what's causing the error. I also have installed all device drivers available from my MOBO's website I think were essential.


I read some forums that it might be related to a device driver issue but at this point I dont know where to start troubleshooting. Let me know if you need my dump file.


Thanks in advance!

:)

 

Driver Power State Failure (ntoskrnl.exe+22092e ) BSOD

Hi Ayan,

I suggest you to follow the steps given in the link below and check if it helps you.

Shutdown BSOD: Driver Power State Failure (Windows 8.1 Pro 64-bit)

Let us know the status of the issue.

 

Windows 10 BSOD driver power state failure

Hi,

I did a clean boot with all the non-Microsoft services disabled and the DRIVER POWER STATE FAILURE BSOD still happens.

Today's DMP files are here: Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

I ran them through osronline which suggested sbp2port.sys.

Any more suggestions?

Thanks.

 

driver power state failure help!

Hi,

It is possible that the error Driver Power State Failure you received is can be caused by
the driver itself or power settings.
To address your issue, we suggest that you follow the steps shared by S M Mahmudul Hasan
on this thread on how to troubleshoot Driver Power State
Failure.

Keep us posted if you need additional help.