Windows 10: Powering a second monitor with a HP 17 Laptop

I have a HP Laptop 17 CN0097nr which does have a USB-C port but after buying a USB C Monitor, I am reading that my port will not power the monitor. And the second monitor only has a USB C port. HOW do I get a second monitor to work with my laptop if the USB C for it does not send power??? Is there an adapter I can get, or a powered hub of some sort? I tried using an a HDMI to USB-C cord and while it turns the monitor on for a moment, the Monitor still says no USB C connection found and shut off! Did I totally mess up by buying this HP Laptop computer if it will not let me run a second monitor?

:)

 

Second monitor connected to DVI on laptop will not power up

I recently bought 2 new windows 10 laptops (one dell, one HP) and am having problems on both when using second monitor.

This monitor worked fine on my old laptop with windows 7, the monitor went on and off with computer power and sleep.

With windows 10 the monitor power behavior is unpredictable, but mostly will come on for a few seconds, then go off, windows makes the 'device connect' the 'device disconnect' sounds. I have the same problem with both the laptops. It takes several frustrating
attempts to get the second monitor to stay powered up and connected. This has to be done every time the laptops wake.

Help, Please. I have checked drivers (up to date) and power settings (always on).

 

HP Envy Laptop with HP Pavilion second monitor - upgrade to W10 not detecting second monitor

Your suggestion didn't help. Since HP had an NVIDIA driver update on their website as opposed to the NVIDIA website which were not compatible. I tried both W8 and W10 packages. So trying to re-install the driver update that was provided by HP again, which
I already had on my laptop and second monitor still didn't work.

 

My hp laptop wont turn on

This is a frequent problem am sure as you have already seen from online searches.

Flea power is usually the culprit here, basically its residual power that remains on the computer even after thecomputer has been shutdown. You can drain the flea power with the steps the other answers have suggested.

• Disconnecting the battery and adapter
• Press the hardpress the power button for 30 seconds
• This should clear the flea power

If this doesnt work, read this article its about
a dell inspiron but the same applies for you hp. It has some detailed step by step instructions