Windows 10: Predator G3620, stuck in Acer logo, and I can neither access BIOS nor the Windows Boot Manager

My Acer Predator G3620 from 2013 upgraded from Windows 8 to Windows 10 suddenly, from early April, will start no more. As soon as the Acer logo shows on the screen, the PC stalls – and not even one single beep signal can be heard. Now I can neither access BIOS nor the Windows Boot Manager – no text at all at the bottom of the screen.I need to attach a USB installation disk, start again and then most often I can change the boot order in BIOS to boot from there. After that and luckily just after1 short beep signal it works.I suspect troubles with my Windows Boot Manager. Following many descr

:)

 

Predator G3620, stuck in Acer logo, and I can neither access BIOS nor the Windows Boot Manager - What to do?

My Acer Predator G3620 from 2013 (upgraded from Windows 8 to Windows 10) suddenly, from early April, will start no more. As soon as the Acer logo shows on the screen, the PC stalls – and not even one single beep signal can be heard. Now I can neither access BIOS nor the Windows Boot Manager – no text at all at the bottom of the screen.

I need to attach a USB installation disk, start again and then (most often) I can change the boot order in BIOS to boot from there. After that and luckily just after1 short beep signal it works.

I suspect troubles with my Windows Boot Manager. Following many descriptions, I have tried correcting it and then I updated my Windows 10 from an USB installation key – nothing with success. Unfortunately, in this version and build of Windows 10, I am not allowed to alter all the boot elements.

I do not see any another error messages and I cannot really interpret the content of the system’s log. Could it be HW errors, CMOS battery etc.? How can I check for the location and cause of the error?

====

Environment:
Windows 10 Home; version 22H2; build 19045.4291 (originated with Windows 8).
64-bit system, x64-based processor: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz .
RAM 16,0 GB.
System BIOS version P11-B1; build date 04/30/2013. UEFI. SMBIOS-version 2.7.

 

Stuck on Acer logo on boot

No I’m not stuck on the BSOD I’m stuck on the Acer boot logo.

Thanks,

 

How do I enter BIOS setup - Acer Computer

User guide says to press F2 when the ACER logo appears. The ACER logo doesn't appear at boot. I've tried pressing F2 anyway but no biios screen. Also tried F12, F10, and Del.at boot. Part of my sysinfo is:

• System Name ACER_DESKTOP
• System Manufacturer Acer
• System Model Predator G3-605
• System Type x64-based PC System SKU
• Processor Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, 3601 Mhz, 4 Core(s), 8 Logical Processor(s)
• BIOS Version/Date American Megatrends Inc. P11-C1, 9/12/2014
• SMBIOS Version 2.7 Embedded Controller Version 255.255
• BIOS Mode UEFI
• BaseBoard Manufacturer
• Acer BaseBoard Model Not Available BaseBoard Name Base Board Platform Role Desktop