Windows 10: Print problem: Ppt deck in format 16:9 needs to be switched to print format 4:3 without...

Hi everybody,

I created a huge ppt deck in the format 16:9.


For the participants of my seminar I need a print version of different exercises which I wanted to save as pdf files.


However when tranferring it to pdf or trying to print it out, the complete format is destroyed. I found out why, the presentation is made in the format 16:9, however printing it to a DINA page it is needed 4:3.


The effect is the headlines switch to the text bodies or tables, etc., which does not look nice at all.


Is there anybody who can give me a helping hand that it won´t be needed changing all the corresponding slides manually?


I would be very greatful for your help :


Sabine

:)

 

ppt to pdf/doc conversion possible?

I've several lectures in powerpoint .ppt format.
I don't want to switch on laptop everytime when i wanna read them..specially during exams..

so i want to print them...but as ppt presentations have slides..if i will print by that way, it'll print 30-40slides for original 5-10pages..

so by anyway, can any software/trick convert ppt file to proper and printable format[e.g. pdf,doc - but not one page+one slide]?

i'm not able to explain properly..i hope you guys understand wht i want to ask..

Thanks.

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

3 D printed stuff

3 d printed Lawnmower

Hans Fouche
has developed a garage-sized 3D printer capable of printing very large objects at speeds which are leaps and bounds ahead of other 3D printers on the market today.






The only parts of the mower which were not 3D printed were the motor, which was taken from an old lawn mower, the blade, the handle (including the switch), and the shafts for the wheels. Print times for the individual pieces can be seen below (colour coded to photo at right):


​

• 4 wheels 45 min / wheel (blue) – 180 min
• Thin top fan cover wheel (blue) – 10 min
• Frame incorporating the stone guard (red) – 190 min
• Top cover (yellow) – 70 min
• Motor cover (gold) – 90 min
• Total print time – 9 Hours

Fouche’s machine prints out very thick rope-like patterns from a 3 mm wide nozzle. Unlike traditional FDM printers, this machine can be fed ABS plastic granules instead of spools of filament, saving the user a lot of extra money. Because of the thickness of the layers, speed is greatly enhanced while resolution may take a back seat.