Windows 10: Printer constantly prints "Get /eSCL/ScannerStatus HTTP/1.1 Host: Localhost" after it wakes...

I have a Brother MFC-L37500CDW multi-function printer/scanner. Was working fine. Upgraded to Windows 11 and now whenever it wakes up from sleeping, it prints a 2-line page saying:Get /eSCL/ScannerStatus HTTP/1.1 Host: LocalhostUninstalled Printer, reinstalled -- no changeUpdated printer firmware -- no changeSwitched USB cable to another USB port -- no changeFrom what I have seen on multiple forums, this is happening with multiple printers and multiple brands. The only constant is they are all connected via USB and all started happening when upgraded to Windows 11.

:)

 

canon mf451dw keeps printing ""GET /eSCL/ScannerStatus Http/1.1 Host: localhost" - Canon says this is a MS problem how do I fix?

canon mf451dw keeps printing ""GET /eSCL/ScannerStatus Http/1.1 Host: localhost" - Canon says this is a MS problem how do I fix?

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

printer installs copy(1)


Hi I have a brother all in one MCF-j470dw, I have it installed to 2 different laptops both wireless, both dell windows 10 laptops, one works fine, the other one for some reason lost the original printer from devices and printers section now there is only a copy(1) there. I've tried uninstalling everything I can think of including whats listed in device*manager but whenever I reinstall the printer it automatically only installs the printer copy(1) no original printer, so every time I try to print it seems to be looking for the original printer and even though I have the copy(1) set as default I have to manually choose the copy(1) to print anything, this is probably not a printer problem because the other laptop works fine but hoping someone might be able to get me some advice, or has seen this before?