Windows 10: Printer not print right after Windows Update, and all my files become read only, can't edit

Right after the most recent Windows Update, two things happened : 1. my printer will not print. I get a message "Printer is not responding". Had tried reboot, still don't print, has been several days now, can't print.


2. When I open a file, the appearance of it is different from before. Like a Word document, it has something on top and the side, and becomes Read Only, can't edit, it's a big problem.


I really hope that they don't do these stupid updates. Next time, I'll check what kind of updates they are, and only do the critical updates. Is this a good idea?


Please help,

:)

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

Error - Printing on Network printer

We have 4 printers on our Windows print server. The server was migrated from win2k3 to 2k8 on friday. 3/4 printers are working great, the other is having issues. When trying to print a test page to it, it gets a job status of Error - Printing.

When sending a small word document to it, it sends it to the printer, the queue is empty but nothing prints. If I goto the printer itself, it doesnt show any errors and I can print things such as information sheets and diagnostic files just fine.

All four printers are the same model, all 4 have a static IP. I can ping the printer successfully. I've tried printing from both an XP machine and the print server itself. I tried removing and adding the printer on the print server. And lastly, uunplugged the printer for 30 seconds, plugged it back in.

Any ideas?

 

Error - Printing on Network printer

The idea of isolating the printers means that if one dies, it only takes itself down & not the whole server. I believe it's a right-click feature in Printer Management.

HP support for Windows 7 sucks, and I'm guessing their 2008 support is right up there. From what I've been told (I'm not the print server guy), HP is asking that you use their universal drivers.