Windows 10: Printers Installed but Won't Print

I've got a PC running Windows 10 that won't print no matter what printer is connected. The printer is shown in Devices and Printers without any errors but when I try to print anything I get the message saying the job has been sent to the printer but apart from the printer software showing the job for about a second before going back to zero, nothing else happens.
So far I have tried the following.
Tried a different printer. Changed the USB cable. Ran Chkdsk. Ran SFC. Updated from Windows 1909 to 2004. Uninstalled and reinstalled the printer software. Checked C:\Windows\System32\Spool\PRINTERS. Nothing to delete. Ran Windows printer troubleshooter.

Very odd.. Any suggestions welcomed.

:)

 

printer won't work on network but will over usb

his printer has a built-in print server.

What you need to know what ip is being give to the printer. Perhaps you can print a status sheet from the printer.

Then Go to printers in control panel

add a new printer

local printer attached, uncheck automatically detect and install PnP printer

create a new port, select standard tcp/ip port

a new window should open and enter the ip there where it says printer name or IP address (port name then should be also be filled as you go)

and pretty much follow the rest of the steps, you will need to install the printer drivers.


These steps is the easy, but not the right way.

The right way is to use the network option on the initial screw and search for the printer server...but that can be tricky to configure.

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

Print to PDF missing in Printer List

Hi William,

We suggest that you disable and re-enable the Print to PDF feature. Here are the steps:

• Click on the Start menu and type in Windows Features.
• Choose Turn Windows features on or off.
• On the next window, find Microsoft Print to PDF and disable it. Click
  OK to save changes.
• Restart your PC.
• Repeat the same steps to re-enable Microsoft Print to PDF.

If the issue persists, we suggest that you perform the troubleshooting steps suggested on the link below under
Advanced:

Fix printer problems

Regards.