Windows 10: Problem ethernet network adapter- Windows 10 Pro

Hi everyone Yesterday morning I powered on my computer, but happened some unusual, my computer was really slow, I think that was my antivirus kaspersky but not, every 10 seconds it's frozen 3 second. Then I boot in "probe errors" and the error gone, then I connect a usb port network and the cable woking, the problem was the operating system. I saw the events and detected error with network controller,I reinstalled the driver from offical website gigabyte but the same problem, I disabled the network adapter and my computer works well, Acually I'm working with wifi connection, but can you hel

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Issues with network adapters

Hi Alfonso,

To resolve this issue, we suggest that you run the Network troubleshooter when you switch from WiFi to Ethernet connection. The Network troubleshooter can help diagnose and fix common connection problems including clearing the network cache to obtain a new
IP from the new network. Kindly follow the steps below:

• In the search box on the taskbar, type Identify and repair network problems, and then select
  Identify and repair network problems from the list of results.
• Follow the steps in the troubleshooter and see if that fixes the problem.

If the issue persists, kindly try the troubleshooting steps on the following link:

Fix network connection issues in Windows 10.

We recommend that you try the steps on the Update the network adapter driver,
Run the Network troubleshooter followed by networking commands, and Use network reset to reinstall network devices sections.

Let us know how it goes for us to assist you further.

 

How can I solve the code 10 problem with my ethernet adapter "Intel (R) ethernet connection I217-LM"

Body: Hello everyone,

I'm experiencing a persistent issue with my Intel Ethernet Connection I217-LM onboard adapter. The adapter is displaying a "Code 10" error in the Device Manager, which indicates that the device cannot start. I've exhausted various troubleshooting steps, and I'm seeking assistance from the community to help resolve this issue.

Problem Description:

• Operating System: [Windows 10, version 22H2]
  
• Motherboard: [HP ProDesk 600 G1 TWR]
  
• Network Adapter: Intel Ethernet Connection I217-LM
  

Issue Details:

• The onboard adapter was working fine until recently when I encountered the "Code 10" error and there is no internet connection at all.
  
• I've tried updating drivers, uninstalling and reinstalling the adapter in safe mode , checking for BIOS updates, and performing network troubleshooters, but the problem persists.
  
• I've tested the adapter in Safe Mode with Networking, didn't work at all , and of course the "Code 10" error still occurs in normal mode.
  
• The adapter's LED lights are slightly blinking, suggesting some level of activity.
  
• I've also tried using the Intel Ethernet Flash Firmware Utility (BootUtil) to diagnose and update the firmware, but I'm encountering difficulties initializing the adapter.
  

Specific Troubleshooting Steps Taken:

• Driver updates: I've downloaded and installed the latest drivers from both the Intel website and my computer manufacturer's website.
  
• BIOS/UEFI settings: I've checked and reset BIOS/UEFI settings related to the onboard adapter.
  
• Safe Mode: I've tested the adapter in Safe Mode with Networking, where it partially works.
  
• BootUtil: I've attempted to use BootUtil to diagnose and update the firmware, but I'm encountering issues initializing the adapter.
  
• I'm reaching out to the community for any additional insights, suggestions, or possible solutions to this "Code 10" issue. If anyone has experienced a similar problem or has expertise in troubleshooting network adapters, your guidance would be greatly appreciated.
  

Thank you in advance for your assistance.

Best regards, [Ahmed]