Windows 10: Problem on PC with BSOD

Hello everyone, So I have a BSOD problem with my PC for about 2 years now. I will try to be very detailed because I am really frustrated and don't know what the issue is, although I am 90% sure it has to be hardware issue at this point. Starting with my current build: Motherboard: Z690 AORUS ELITE AX rev. 1.x RAM: KINGSTON FURY BEAST 16GB 2 X 8GB 5200MHZ DDR5 BLACK KF556C40BBK2-16 CPU: Intel Core i5-13600K 3.5 GHz 14-Core Processor CPU Cooler: be quiet! Dark Rock Pro 4 50.5 CFM CPU Cooler GPU: Gigabyte Vision OC GeForce RTX 3060 Ti 8 GB PSU: Cooler Master V650 Gold V2 650 W 80+ Gold Certi

:)

 

Pc bsod to bios

Currently replying on iPhone, I’ll give you a proper timeline Step 1) during the program of tuneup plus my pc bsod 3 times but I was finally able to get the info Step 2) Restore point was easy and done quick which now leads to step 3 Step 3) After starting the WDV my pc bsod with the stop code of “System thread exception not handled” following the steps I open command prompt and tried to turn it off which says that nothing was changed, so then after a couple of bsod’s later I manage to go back to my restore point which now leads to a problem I cant seem to fix where when I try to open my pc it says something is wrong with my pin with error code (0x80090016) If needed I do have the tuneup plus info Trying to solve the pin problem if anyone suggestions please inform me.

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

BSOD- atikmpag.sys

This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:

• Drivesweeper all drivers & in Safe Mode
• Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
• After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers

Once your done, restart the PC and then try installing the latest drivers.


I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

Best of luck! *Toast :toast: