Windows 10: Problem while starting my notebook with Batterypower <= 70%

Hello,since a few weeks, i have a problem with starting my notebook in battery mode and a charge under ca. 70 percent. I get very often a Blue Screen BSOD with the Errorcode VIDEO_DXGKRNL_FATAL_ERROR before seeing the lock screen. In my event log i've found the Bug Check error causing the problem with param 0x00000113.Interestingly, when i start my notebook with low battery on cable and after starting removing the cable, i can use the laptop until battery is fully decharged.I've already reinstalled Win 11 without any success to my problem.It would be very awesome if somebody is here who can

:)

 

Cortana Notebook

In order to enable the Notebook icon in Cortana, I suggest you to check if you have enabled Cortana.

To enable Cortana, please follow the steps below:

• Go to Cortana.
• Go to Settings.
• Turn on “Cortana can give you suggestions, ideas, reminders, alerts”.

Hope this helps.

 

Charging stuck at 70%

If the laptop works without the battery then charger is functioning correctly. Take a cloth with a bit of rubbing alcohol on it (or some on-the-go alcohol swabs), and clean the metal contacts that connect your battery to your laptop.

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

Windows 10 1709 System Restore problems...

That seems to be an attempt at Option 2 in the tutorial, which requires you to
a. Boot to a command prompt (Did you?)
b. You then seem to be mixing steps 3,4 and 5, thus your command is incorrect.

I suggest Option 1 is easier.

If you still have problems, please repost listing each specific step and saying which option from the tutorial you are using. Thanks.