Windows 10: Problem with booting to SSD with Windows installed

So yesterday my PC was kind of acting up, it wasn't detecting the SSD with my Windows 10 Pro installation. Once I switched the SATA cables I got a screen that said, "Windows failed to start" at the bottom it had the error code 0xc0000001. When I switched the SATA cables for my SSD and HDD I was able to boot into Windows but the HDD was not mounted. So I decided to plug the cables to the different SATA ports on my motherboard I'm pretty sure it's the asrock h570m pro4 but I got the error screen again. However when I connected the SSD to a laptop I have, I was able to boot perfectly fine.If an

:)

 

windows xp installation and dual core am

could someone please list the steps they follow to install windows with a dual core processor and windows xp service pack to. I'm reletively new to amd dual core and i feel i'm missing a step. All help will be appreciated. thanx

 

[SOLVED] "AMD Data Change..." boot freeze problem on GA-MA785GT-UD3H after SSD installation

Thank you for your replies. As Mussels suggested, cloning was not a right decision. Yesterday I reset my BIOS by removing battery for 10 minutes, then loaded optimized defaults from BIOS, then installed Windows from scratch to my SSD drive. It worked. I still see that message during boot process, however it is not a problem.

 

Unable to Boot to SSD after Windows 10 Install

Thanks in advance to anyone who takes the time read this, I will try to keep it short, but I have been struggling for a while with this and tried a lot of different things!

Computer Info:

• Windows 10 Home v.2004 Build 19041.450
  
• AMD Ryzen 7 2700x
  
• 32GB RAM
  
• Aorus Ultra Gaming X470 BIOS Version F30 (I have tried updating the BIOS with continued problems, so I stayed at this version)
  
• Windows currently installed on HDD Western Digital WDC WD10EZEX-22BN5A0 (this one is super old thus the attempt to transition to a new SSD)
  
• I also have another HDD and SSD installed that I use for storage
  

Main Problem: I am unable to get my computer to boot to my Samsung 850 EVO 250GB SSD after installing Windows on it from the Media Creation Tool (I have also tried Rufus which ends up the same)

Prevailing Error Code: When I have just that SSD connected to the computer it will try to boot and give me the error message "Reboot and Select Proper Boot Device"

The Process I have Followed:

1. Clean/Wipe SSD using diskpart
   
2. Shut down PC, disconnect power cord, hold power button
   
3. Disconnect all other drives, USBs, etc.
   
4. Boot to BIOS, which sees both the Media Creation Tool (MCT) and the SSD
   
   1. Disable CSM Support
      
   2. Disable Secure Boot
      
5. I have tried both setting the MCT and the SSD as the 1st Boot Priority, as well as going to the Boot Order Menu, and selecting the MCT from there
   
6. Once inside the Windows install, I have tried both 'New' when selecting the SSD, as well as simply hitting 'Next'. The MCT does the install no problem, but then when it says "Windows Needs to Restart to Complete the Installation" is when I have problems
   
   1. (interestingly the MCT only creates 3 Partitions on the SSD - does not create the 'Recovery' Partition)
      
7. PC will Reboot but go right back to the MCT
   
8. When I go back to the BIOS, the SSD is no longer "seen", if I simply remove the MCT flashdrive then I get the "Reboot and Select Proper Boot Device" error
   

I will link forums that I have follow to the T. I have experience with computers so I do not skip steps or take shortcuts.

• Cant Install on SSD
  
• Clean Install Windows 10
  
• Clean Install Windows 10 v.2
  

Please someone help if possible! I will keep an eye on this post, and will be responding with answers as possible.

Thanks again for your time.