Windows 10: Problem with chipset usb controllers error 10 at every boot

Hello,

Since some weeks my usbs stopped working, including the mouse and keyboard. Fortunately I have remote desktop enabled and I could access to the computer. What I saw is that in every boot the usb chipset go to error state with code 10 (The message is: Insufficient system resources exist to complete the API).

I tried uninstalling and reinstalling the driver, updating it , disabling and enabling, using troubleshooter and reinstalling the usb.inf. The only that enables ok the usbs is disabling and enabling it, but when I reboot, error 10 again.

I don't know what to do. I found in other sites that the solution is only perform a repair install or format the computer and because I don't have time and I'm very lazy about formatting the computer I want to know if there are other options that would repair my usbs.

Thanks

:)

 

Intel (R) 5 Sries Chipset Family USB Universal Host Controller 3B36. Probleme with Windows 10 on Boot Camp on iMac 11,3

I have Windows 10 on Boot Camp on iMac 11,3.

Windows 10 says: BAD_POOL_HEADER.

Windows 10 can not solve this problems:

.- Intel (R) 5 Series Chipset Family USB Universal Host Controller - 3B36.

.- Intel (R) 5 Series Chipset Family USB Universal Host Controller - 3B3B.

What can I do?

 

Driver for USB Enhanced Host Controller

There were problems installing some updates, with this massage.

• Intel - Other hardware - Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26 - Error 0x800f0219

• Intel - Other hardware - Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D - Error 0x800f0219

how to solve the problem

 

If you wish, You can try:

• Download: DriverStore Explorer . Right click and run as Admin->Enumerate, Check mark on all USB drivers, check on "Force Deletion" then delete.
• Shutdown the PC then open the case. Clear the CMOS or in some new MB, there's a button on the back to clear the CMOS.
• Reboot. Windows should try to install the USB Driver. If not, Installl the chipset driver for your MB.

NOTE: Make sure that you have the mouse and keyboard connect to USB 2.0 port


Good luck !!!

 

Thanks, it didn't work

 

Fill out your System Specs then we'll go from there.

 

Is BIOS version 1106 the latest ?
Here's a good article on error code 10. Follow the steps to see if it fixes the problem:
http://pcsupport.about.com/od/findby...e-10-error.htm

 

Many, many thanks men! Deleting LowerFilter and UpperFilter of USB classes with it solved the problem!. I was stuck with this for about a month.

 

Great. Glad you got it sorted.