Windows 10: Problem with my Wifi adapter

Hello, i am exprecing a problem with my wifi it keeps disconnecting and then i can't seem to find it at all in the Network list, the problem doesn't seem to be in the modem since my phone and another laptop can connect to the wifi normally, also the light indicator of Networking in my laptop sorry that i couldn't describe it better i don't know its name turn off when i restart my computer when i exprience the problem mentioned above, i tried all the solution mentioned in this Microsoft community post :

qualcomm atheros ar956x wifi adapter problems - Microsoft Community but the problem didn't go away my wireless adapter name is same as the community post. i tried updating the driver, i unistalled the driver completely and then reinstalled all with no hope. is the probelm with hardware it self maybe??

Thanks.

:)

 

Problems when sharing WiFi with the Virtual Adapter

For many years I have always shared Internet to my devices like phone and tablet with my PC's WiFi antenna through the Microsoft Wi-Fi Direct Virtual Adapter, I only use it for that, since I have a cable connection, and I start the wifi with the command NETSH WLAN start hostednetwork previously having done the settings of NETSH WLAN set hostednetwork mode=allow ssid="Wifi" key="password".

For my devices to connect it is necessary that the Virtual Adapter that is created with that command has access to the Internet, for this I have to share the Internet from my Ethernet adapter to the Virtual Wifi adapter.

For some time now (a couple of months) I've been experiencing problems when sharing the Internet through that medium. The problem is that when I start the WiFi my devices do not connect, they say "Getting IP address" and never connect.

I have found the solution and I have to do the following:

1. Disable the Virtual Adapter with the command netsh wlan stop hostednetwork.
2. Remove the connection sharing from the Ethernet Adapter.
3. Activate the Virtual Adapter with the command netsh wlan start hostednetwork.
4. Adding connection sharing from the Ethernet Adapter to the Virtual Adapter again.

By doing these steps my devices can now be connected to the Wifi, but sometimes it doesn't work if I do these steps too quickly. I have noticed that if I do step 3 and 4 too quickly it does not work and I have to repeat the process but doing these last two steps more slowly, until the Virtual Adapter gets an IP address 192.168.137.1 from Internet Protocol version 4

Also this problem does not occur 100% of the time. Sometimes when I run the command to start the Wifi everything happens fine and my devices connect well but this only works after my PC has been on for at least 5 minutes (I haven't counted it). If I run the command as soon as my PC has turned on then it doesn't work anymore.

As I mentioned before this problem didn't occur before because I had configured a .bat file that ran as soon as the PC was turned on with the NETSH WLAN start hostednetwork command and everything worked fine.

Now, I would like to go back to before when everything was fine so that when my PC starts up the WiFi too and I don't have to do all this protocol all the time, but with a simple command everything is solved.

Could someone give me a hand with this?

 

Wifi and browser problems with windows 10


I'll tell you how I fixed an identical problem on a ASUS laptop that had run perfectly on Windows 7 and ran well on W10 from January until the Anniversary update in early August. I tried everything I found on this forum and two others. Nothing worked. The last thing someone suggested was disabling the adapter and using a WiFi dongle. Problem continued. Nobody suggested changing the wireless network adapter. I bought and installed an Intel 7260 WiFi card and just used the driver which was downloaded on the reboot after the install. All problems solved!!

I must have wasted two months reading and trying everything. Even the manufacturer support inferred I needed a new machine though they sent me a Windows 8.1 driver to try, with the same result.

I'd suggest contacting the manufacturer to determine if they white list any cards and see if they have suggestions for a compatible card. They may want you to buy another laptop but if the cards aren't white listed, a simple card swap to one compatible with Windows 10 seems to be the answer.

 

Wifi Adapter

Here are several methods:

• Look in the user guide - see if 5 GHz WiFi is mentioned.
• Find that model on the manufacturer's website - see if the manufacturer advertises 5 GHz capability.
• Look for independent reviews of your model - the reviewer will certainly mention if the adapter supports 5 GHz

If none of those provide the answer, I can suggest many more ways to find out.