Windows 10: Probleme acpi bios error screen bleu

Probleme Acpi bios eroor screen bleu

:)

 

ACPI BIOS ERROR LOOP

Hello Zai_v,



Welcome to Microsoft Community.



I understand that your ASUS laptop has a blue screen fault, and the error code is ACPI_BIOS_ERROR

This error usually indicates a problem with the ACPI Settings in the computer BIOS (basic input/output system). The BIOS is a firmware that initializes the hardware and boots the operating system. ACPI BIOS errors can occur for several reasons:

1. Outdated BIOS: If your computer's BIOS is outdated, it may not be compatible with the ACPI Settings required by your operating system.
   
2. BIOS damage: BIOS corruption can result in various errors, including ACPI BIOS errors. This can happen because of a failed BIOS update or other software/hardware issue.
   
3. Hardware conflict: In some cases, hardware conflicts can cause ACPI BIOS errors. This can happen if the device the computer is connected to is incompatible or the hardware component is faulty.
   

To fix ACPI BIOS errors, try the following solutions:

1. Update the BIOS:
   
   Visit the manufacturer's website to download the latest BIOS version of your computer. Follow the manufacturer's instructions to update the BIOS. This should resolve any compatibility issues and resolve ACPI BIOS errors. However, you may need to download the BIOS firmware from another device, then copy it to the USB flash drive, and then try to do it directly in the BIOS after setting the USB flash drive boot priority in the BIOS.
   
2. Reset BIOS Settings:
   
   Press a specific key (usually Del, F2, or F10, consult Asus support for details) to access BIOS Settings during boot. Look for options to reset BIOS Settings to default values. This helps resolve any configuration issues that cause ACPI BIOS errors.
   
3. Check the hardware connection:
   
   Ensure that all hardware components are properly connected to the computer. If you recently installed new hardware, remove it and see if the ACPI BIOS error still exists. If not, the problem may be caused by the new hardware, if you do not have the technical ability to remove the device, please follow the guidance of ASUS after-sales support.
   

It is important to note that changing the BIOS can be risky and can cause more problems with your computer if done incorrectly. Therefore, if you are not familiar with BIOS operation, please follow the guidance of ASUS after-sales support.

Best regards,

Mitchell - | Microsoft community support expert from MSFT

 

ACPI BIOS ERROR

Hi Tiffany,

We need to gather more information for us to better assist you on your ACPI BIOS error concern. Please provide the answers to the following questions below:

• When did the ACPI BIOS error start?
• Were there any changes made on your computer before encountering the issue?
• What are the things that you're seeing when you boot up the computer?
• Can your computer still load the Windows Recovery environment page? Windows Recovery environment is a page where you can choose to troubleshoot the computer, continue to Windows 10, or shutdown the computer.

We highly recommend posting a screenshot of the issue here for us to further investigate your concern.

 

ACPI Bios Error

A friend of mine built his first computer and iv been called in to figure out what in the world this problem hes having is. Iv tried quite a lot already, ill list those out in a second. He never got past trying to install windows 10 due to the ACPI BIOS
ERROR.

System spec:

AMD Ryzen 5 2600x CPU

ASUS Prime B450M-A Mother Board

Strix GTX1050ti GPU

Ballistix DDR4 2600 RAM

a 2Tb Western Digital HDD

Behavior on boot attempt: The computer starts up fine, gets to the ASUS logo screen and then BSODs with the ACPI BIOS ERROR.

I have tried:

updating the BIOS

clearing the CMOS

tried installing Win7 same Error

Installing Win10 on the HDD outside the system.

Using Rufus to make a bootable USB from the ISO files

CSM, Secure boot, Fast boot, all OFF/ON in every variation

SATA switch to RAID from AHCI

IV tested all the hardware plus gotten Linux to run fine.

After all that the only change is that now it tries to boot into the automatic repair after the first 2 BSODs but the moment it tries to load its just BSODs with the same ACPI BIOS ERROR.

Not gonna lie im pretty stumped on this one, best guess is its a windows 10 problem somewhere. Judging from google i'm not expecting an easy one click solution but any help would be appreciated.