Windows 10: Problems with BSOD & memory errors

Hello, so I started getting problems with my computer around 1 - 2 months ago. I get mainly 'memory-related' problems as I see it, like MEMORY_ACCESS_VIOLATIONS in Chrome and many Application Error 0xc0000005 Access Violation and the like, like notepad crashing and/or other apps.Im also getting some BSOD as well see provided minidump.My current system:CPU: IntelR CoreTM i9-14900K 3.20 GHzGPU TUF-RTX4090-OGMotherboard: ROG STRIX z790-E GAMING WIFI IIRAM: 96gbNow, for what I've done without success:1. Ran windows update & updated ALL drivers & chipset2. Flashed BIOS to newest v

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Gigabyte Z68X-UD4-B3 problem or incompatibility

All right.. that error is due to memory error. how are the timmings in the Bios? Are they set to auto or are they manually set by user?

A lot of Window "bsod" errors when you first log in isn't due to any board error. It's due to your ram not being set to the proper settings.
Any error that has a "# then Letter (4e)" is in result of Memory related error..


I suggest this:

• set ram to spec. in the tRFC set it at 150 or above.. but don't go above 200..

Most likely what has happened is that your memory wasn't stable and thus your windows install is now messed up.. with Vista and 7 you have to have system stable before even installing a os. If you don't, then your first boot, or any boot after will run with a bsod with memory error..

• Download Memtest 86+ Then read this so you understand what to are doing.. Your checking to see if the memory is stable at those settings. 2 runs will make it known your system is stable with the settings you have.