Windows 10: Procedures to plug in and check an unknown hard drive

Received a PC from a relative, since I like to tinker with old PCs. It's busted, can't start so for now I just remove the hard drive + RAMs and recycled the rest.


I have the necessary cables to hook the hard drive from that old PC up to my own PCs. However, I am worry there might be viruses and other things that can damage my PC. What are the procedures when you test unknown hard drives? Any software that can sandbox the hard drive so the moment I plug it in there won't be any risk?

:)

 

Overclock your hard drive!!!

Heres a much easier hack that I realized quite a few years ago that really does work!

REQUIREMENTS:

• Hard drive with molex power connection.
• PSU with more than 1 strand that has molex plugs on it.
• Wire strippers, soldering iron if you're fancy, electrical tape if you're not.

STEPS:

• Take the strand of connectors from your PSU, and decide which one will be the donator for this overclocking adventure.
• Cut the yellow and orange cables, then twist them together.
• Find the power connector you've chosen as the overclocking connector, and release the orange cable from the connector. Now use your preferred method to bind them together, then place it back together.
• Plug in a drive and feel the speed!

Congratulations! You've just overclocked your hard drive!

 

Overclock your hard drive!!!

Wut =D

what is that supposed to accomplish?

 

Computer freezes and Explorer doen't respond when I plug an external Hard drive

Hello jobkakule,

The issue is possibly caused by corrupted data or bad sectors on your external hard drive or could be a sign of a failing hard drive.

To better assist you with your concern, I'd like to know the following:

• Confirm which build is currently installed on your device. To check, follow the steps below:

1. Press Windows key + R, then type in winver.
2. Click OK.

• Have you tried plugging your external hard drive to a different USB port? Also, check if you can access the drive by plugging it to a different computer.
• What is the make and model of your computer?

Meanwhile, I'd suggest to repair the bad sectors on your external hard drive. Kindly refer to the steps below:

(Let's just assume that the drive letter for your external hard drive is E. If not, please do change it to the correct drive letter)

1. Plug in your external hard drive. Click on Start, search for
Command Prompt, right-click on it and select Run as administrator.

2. Type in the following command below and press Enter after each command:

Chkdsk /f E:

Chkdsk /r E:

3. Reboot your computer after the scan is completed.

Looking forward to your response.

Regards.