Windows 10: Process1_ initialization failed and tried everything

BSOD error and ive tried every single trouble shooting step i cannot resort to reinstalling windows because of file loss no way to back up there is no Bootcat.cache file to delete in my codeintegrity folder im getting very stressed out and just wanna use my pc all i did was open my system because there was dust and i cleaned it out and i put it back together and this started happening

:)

 

Ssd upgrade

What do you mean "no good"? At which step did it fail?

 

bl initialize library failed 0xc0000bb

Let's try to use system restore instead. Follow the steps below:

• 
  Start your desktop, and after the manufacturers logo disappears and Windows 10 tries to boot, press and hold the power button for 5-10 seconds to perform a hard shut
  down.
  
  
  
• 
  Do the step #1 until you see the Windows logo screen or Please wait during boot. (You
  may need to perform this up to 3 times.)
  
• 
  After Windows 10 boots into the Windows 10 Recovery Environment (WinRE), you can now access Startup
  Recovery, Safe Mode, and Command Prompt.
  
• 
  Go to Troubleshoot > Advanced Options > System Restore,
  and then check if you have a restore point.
  
• 
  In the list of available restore points, choose the date prior to the issue. Steps can be found in this article on
  how to perform a System Restore. Refer to Restore from a system restore point.
  

If the steps above fails, we suggest that you boot your computer in Safe Mode (while in the Recovery Environment) and see if it helps. Follow the steps below on how
to boot in Safe Mode:

• 
  Go to Troubleshoot > Advanced Options > Startup Settings and click Restart.
  
• 
  Upon restart, click/press 4 to boot into Safe Mode.
  

If Safe Mode does not work, we may need to Reset your computer. Follow the steps below:

• 
  Go to Troubleshoot > Advanced Options > Reset this PC.
  
• 
  Choose to keep all your files and applications. This will re-install Windows 10 whilst keeping your data and applications.
  

Update us after you perform the steps.

 

KB4025339 Fails Install 0x80070564

Thanks
I am trying Eagle 51's suggestions now. Windows Update troubleshooter found a bunch of errors and fixed all but one.The update is trying to download KB4025339 again. I'll see what happens. At step one troubleshooter finishes with one error unresolved "Potential Windows Update Database Error Detected-Not Fixed". Windows update stalled at 0%.

At step 2 same troubleshooter error. The KB finished a new download failed to install.
Did step 3 KB has downloaded but fails to install.

If Eagle's suggestion doesn't work I'll try EdTittel's suggestion

Tried bothe Eagle & Ed 's suggestions - do not work. Anyone else?

I have noticed that the latest update for my nvidia drivers has failed to update. Wondering about that!