Windows 10: Processor requirement

I have Processor IntelR CoreTM i5-7400 CPU @ 3.00GHz, 3001 Mhz, 4 Cores, 4 Logical Processorsyet PC health check up says it is not supported how could that be where the requirement is Processor1 gigahertz GHz or faster with 2 or more cores on a compatible 64-bit processor

:)

 

Intel Gives Core i3 and Core i5 Dual-Core Processors K0 Stepping Update

Intel is giving some existing 32 nm "Clarkdale" based Core i3 and Core i5 processors an update. The processors will transition to the new K0 stepping from the existing C2 stepping. The parts that will be made on the K0 silicon are Core i3 models 530 (new sSPEC: SLBX7), 540 (new sSPEC: SLBTD) and Core i5 models 650 (new sSPEC: SLBTJ), 660/661 (SLBTK/SLBTB), 670 (SLBTL). Newer and upcoming models such as the i3-550, i3-560, i5-665K, and i5-680 are already being built on the K0 stepping die. Motherboards will require a BIOS update to support the new K0 stepping processors.

The K0 stepping change includes the following highlights:

• New S-spec and MM numbers for the converting products
• Extended CPUID will change from 0x00020652 to 0x00020655
• Host RevID will change from 0x12 to 0x18
• K0 stepping package is pin compatible with C2 stepping package
• Adds Processor Context ID (PCID) support

The revised older SKUs that are built on K0 stepping will be market-available by October 16.

 

Processor upgrade

Looking at the CPU compatibility list for the board, it requires F40 or later to support the 3600. B450 AORUS PRO WIFI (rev. 1.0) | Motherboard - GIGABYTE U.S.A. The latest version is F50.

What's your BIOS version?

If it's a suitable rev, I suggest clearing the CMOS afetr swapping processors.

Best of luck.

 

CPU / CPU Processor problems / Processor affinity

We appreciate the information you provided. Your processor is working as expected. CPU affinity is only showing CPU (0) since 1 processor is working at the moment. It's very likely that your computer is using a balanced power plan, so we suggest changing
your power plan to High Performance by following these steps:

• Right-click Start.
• Click Power Options.
• Choose High Performance.

In addition to that, we recommend installing the latest updates to keep your system current and secure. Go to
Start > Settings > Update & Security > Check for updates.

Some programs may also be automatically launching whenever you boot your computer, affecting the performance. To disable them, follow these steps:

• Right-click your taskbar.
• Click Task Manager.
• Under the Startup tab, find the programs that you don't need.
• Right-click the program and choose Disable.

You're also using your computer for a game that was designed to run on an earlier version of Windows, so it's possible that it's slowing down your computer. In this case, use the Compatibility Troubleshooter to find and fix problems with the program using
these steps:

• Click Start.
• Type Troubleshooting and press Enter.
• Click Run programs made for previous versions of Windows.
• Click Next.
• Choose the program from the list and click Next.

Let us know if you need further assistance with your computer.