Windows 10: කැම්රි වැඩේ. උබලගෙ ෆෝන් එකක් ගත්තා. උබලා උබලගෙ product පාවිච්චි කරන අපිටම කෙලෙව්වා. cant...

කැම්රි වැඩේ. උබලගෙ ෆෝන් එකක් ගත්තා. උබලා උබලගෙ product පාවිච්චි කරන අපිටම කෙලෙව්වා. වින්ඩෝස් 8.1 දැන් වැඩක් නෑලු. දැන් ෆෝන් වින්ඩෝස් ෆෝන් ගත්ත ලමයි ගෙදර යන්න.

:)

 

Product ID

Hi Russell,

We appreciate the information you've provided regarding the product ID. To resolve your concern, we suggest that you do the following steps:

• Click on Start and type: Command Prompt.
• Right click on it and select Run as administrator.
• Type: wmic path SoftwareLicensingService get OA3xOriginalProductKey.
• Press Enter. That should give you the product key to type in the activation.

Get back to us if you need further assistance.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

GeForce 8800

there is only one card listed...

the gts 320 is def hot, but if you're asking for a certain brand, i like evga products, warranty, step up, etc, separates them from the pack