Windows 10: PS4 controller not showing up as a device when i connect it with usb, i dont have Bluetooth...

when I plug,y controller into the pc it doesn't flash any colour, it is charged fully, and when I go into the device manager nothing shows up to do with the controller, I don't have a Bluetooth capability on my pc. I have tried different USBs and different controllers and I have tried uninstalling and reinstalling the HID game controller driver, nothing happens I already have steam which should've downloaded those drivers for the controller and I also have ds4windows but again it isn't any help. I've tried resetting the controller via the ps4 and forgetting it on the ps4 and with the reset button on the back of the controller. when it's plugged in with the USB cable I've also tried different USB ports and when I press the ps button it flashes blue as if it needs to connect. nothing has helped and I'm really stuck, I have also recently upgraded my pc to SSD's if that has any effect on it.


thanks for any help.

Jak

:)

 

Unable to connect PS4 controller to PC

I play video games regularly and I use a ps4 controller to play them. I use a bluetooth usb adapter to connect the ps4 controller to my pc, however, I always have to go into settings, click " remove device" from the pc, then connect with bluetooth and type
in the four digit pin which is 0000. I tried using the "windows key + a" shortcut to open the menu with all the connection options then click connect. When I click connect nothing shows up even though my controller is on pairing mode. Is there a fix for this
issue?

***Modified title from: Windows 10 Bluetooth Connection with Ps4 Controller ***

 

USB Connected device not found by PC

Hi,



Thank you for writing to Microsoft Community Forums.



We understand how difficult it is, when the device doesn't work in the way it should. I appreciate the troubleshooting steps that you've tried so far.



Since you tried the same PS4 controller on a different laptop and failed to connect, resetting the system is not required and assuming that it could be a hardware related issue.



In this scenario, we would suggest you to try these methods and let us know the result of these methods.



Method 1: Steps to reset PS4

1. Turn back the controller.
   
2. You should see a tiny reset button. It must be close to the L2 button.
   
3. Use a pen or a needle and push the button for 10 seconds.
   
4. Connect the controller and check

Method 2: Update HID in Device Manager.

1. Press Windows + X and click on
   Device manager.
   
2. Click on View tab on the top. Select
   Show hidden devices.
   
3. Search & Expand Human Interface Devices and then check for
   HID-complaint game controller.
   
4. Right Click on it and select Uninstall.
   
5. Restart the PC and plug in the USB PS4 controller to install automatically.

Method 3: Set the PS4 as default app.

1. Press Windows +R key from the keyboard to open Run command.
   
2. Type joy.cpl and click OK.
   
3. Select the PS4 controller in the list and click on Advanced tab below.
   
4. Then select the PS4 controller as preferred device and click OK.

However, you can also refer this Error:
“USB Device not recognized” when you try to access a USB external hard drive article to troubleshoot, please exclude method 1 and 2 as they are not relevant to PS4.



We await your response.



Aditya Roy

Microsoft Community – Moderator

 

Unable to connect PS4 controller to PC

I can connect the ps4 controller just fine, my issue is that it wont show up at all after being paired. I have to unpair it, connect the device, enter the 4 digit code, it gets very tiresome. Method 1 didn't work because I had no greyed out devices. Method
2 I have been doing, I am just trying to figure out a quicker way to connect it.