Windows 10: quad cortex usb connection in windows 11

I have a Neural Digital Sound Processor device - Quad Cortex. My Chillblast laptop running windows 11 home edition does not even respond like anything is happening when i plug the usb cable in. I have tried uninstalling and reinstalling the usb controllers and that had no effect.I went and bought an old second hand Lenovo ThinkPad running windows 10 and it recognises the Quad Cortex, no problem and I can easily manage the device with the Quad Cortex Control software.What do I need to do to get my Windows 11 laptop to work with this device?

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

What kind of quad.

I suspect you are at "the edge" of the power rating for the mainboard. Perhaps Q6600 wasnt listed due to TWO versions, C3 stepping at 105W and G0 stepping at 95W. Furthermore, if you OC the G0 Q6600 then it will use more than 95W. Since Q9300 is on a 1333 buss, then perhaps the BIOS doesnt give you scope to OC it, keeping it well withing the 95W envelope.

My suggestion is, if the mainboard is important to you and you dont want to blow the power regulators or caps, to NOT OC the Q6600. Take the thing out of design spec (by OC'ing it) and you may very well rapidly reduce the half-life of your board.

Also, as erocker suggests, there are 65W quads out now. I think those are better suited to this mainboard.

Good luck.

 

Brand new Raspberry Pi 2 comes with Windows 10 AND Ubuntu support !

sources