Windows 10: RAM Issues and General Computer Errors

Hi there, I've been experiencing problems with my PC ever since I got it in late 2021. I've had many blue screens and when I'd check Event Viewer, I would see that dump file creation had failed and the reason of the blue screen was due to error 56, application popup. I've also seen errors such as a critical hardware error has occurred and a corrected hardware error has occured again in the pci express root port. I tried narrowing it down to either hardware or software, and I believe it is as hardware error, specifically my RAM, as everything else seemed healthy according to Windows and various

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

'Generic PnP monitor' issue

Hello Angelica,

I would suggest you follow steps to update the monitor driver:

Press Windows + X keys

Choose Device manager

Click on Monitors

Right click on ‘Generic PnP monitor’ and click on update driver

Tap on Browse my computer for driver software

Tap on Let me pick from a list of available drivers

Choose ‘Generic PnP monitor’ and tap on Next

When you are done please restart the computer.

 

UnattendedJoin error: failed to find the domain data (0x6e)

Thanks for the suggestion! I don't want to add a domain account, as this is a generic unattended install that will be used for all company machines. Do you think it's possible that the computer would join the domain if, instead of using UnattendedJoin in specialize, I used your steps but left out the specific account? The other thing I was thinking was to use a generic account to allow the domain join during the specialize step. I added a machine password in the UnattendedJoin component, and instead of getting the error listed above, I got an authentication error, which makes me think I could probably do a secure join instead of the unsecure join. Thoughts?