Windows 10: Ram Issues

After a ram upgrade, my pc boots up like normal but when it reaches the windows screen it says that it ran into a problem and needs to restart with the acpi bios error message. it then boots again and says it is doing automatic repairs before giving me the Error Code 0xc00000e9. I need to take out 2 of the 4 sticks i installed for my system to work.Any help is appreciated! Specs:Akoya E4360 DprocessorIntel® Core™ i3-530 ProcessormotherboardMS-7616 with 4 ddr3 supporting 16gb 1333/1066 mhz ram, pcie x16 & x1, 6 SATA IImemory8GB2x4Gb sticks but was hoping for 4x4gb sticks but it

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

To RAM or not to RAM...

Hey genesis what hardware have you bought, you might be able to save on the ram and step up the rest of the hardware a little...

Or you could go out on the town as suggested... *Big Grin

 

List of Micron D9 RAM: Request sticky.

Maybe now you see those Rams I suggested to buy for your rig. They are at the top of the list there...