Windows 10: RAM not detected

Recently I bought a new 4GB DDR4 RAM stick for my pc with the hope of doubling it, previously I had one 4GB stick. I bought the same brand same model RAM Crucial Basics 4GB DDR4 RAM, model number: CB4GU2666. When I installed it into the other memory slot of the motherboard Gigabyte GA-A320M-S2H, rev 2.0, has two memory slots, dual-channel configuration and tried to boot up, it disappointed me. It didn't boot up. But the fans CPU fan, power supply fan, and the cabinet fan were moving.Firstly I thought that the RAM is faulty, but it isn't. When I replaced the old RAM and put it into that

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Ram problems

Hi,

To better assist you, please answer the questions below.

• What is the full specifications of your computer?
• Which type of RAM are you trying to install?
• Have you checked if the total RAM is detected in the BIOS?
• Have you tried installing just the 8 Gb RAM and see if the system detects it?
  

We suggest that you contact the computer manufacturer for information on how to enter the BIOS and how to set the default settings. Also, you can ask them if there is an available update for the BIOS.

We're looking forward to your response.

 

To RAM or not to RAM...

Hey genesis what hardware have you bought, you might be able to save on the ram and step up the rest of the hardware a little...

Or you could go out on the town as suggested... *Big Grin