Windows 10: Ran Driver Verifier and now my PC won't output to display

I've been having problems with WDF Violation blue screens and have tried multiple options to fix it and none of them worked. I was then told to run Driver Verifier to try and diagnose the issue but now when I boot up my PC everything turns on like normal but I get no display output. Did I just brick my PC? How do I fix this?

:)

 

cortana won`t talk to me

Hi Steven,

Thank you for posting in Microsoft Community.

It's unfortunate that you are facing this issue. Let me assist you to resolve the issue.

I appreciate if you could answer few questions to narrow down the issue and to provide you better assistance.

• Check and verify if Cortana is activated?
• Does Cortana search and gives any output/result on screen?
• Is the Language and region settings set to valid value?
• Check and verify if Cortana available in your region?

Method 1:

I suggest you to try to turn Cortana off and then try turning it on back and check if she talks. Refer to the steps below to turn Off and On Cortana:

• Open Cortana.
• Click the hamburger button in the top left of the window.
• Go to Settings and click on off.
• Follow the same steps to turn it on.
• Check if issue persists.

I would suggest you to refer to the article given below and check if that helps.

Cortana & search

http://windows.microsoft.com/en-us/windows-10/cortana-search

Hope this information helps, let us know the status of the issue

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.

 

Display was not migrated

Hi,

I understand the above solution didnt work so as to next step in solving your issue I suggest you follow the below.

Step 1:

Go to search box next to Windows icon and type Device Manager

Step 2:

Under Device Manager expand Display Adapter

Step 3:

Right-click on Adapters listed one by one and select Properties

Step 4:

Select the Drivers tab

Step 5:

Click on Uninstall Device

Step 6:

Repeat step 3 to 5 for all listed adapters under Display Adapter

Step 7:

Restart PC and verify

Let me know the status after performing the above.

Regards

Shuaib

Independent Advisor