Windows 10: Random BSODs

Hi hope u guys can help me. would be very thankful *Smile

Got a new system 1-2 Months old. Fresh installed Windows 10 Pro Build 1511.
But I am getting Bluescreens (not sure what the cause is) random. For example once I plugged in an USB-Stick I got an Bluescreen. Last time (yesterday) I was pushing the Windows 10 shutdown button -> got an bluescreen! This made me kind of sceptical what is wrong with my system?

I allready made one memtest86+ (5.01) test (1 pass no errors) but it detected my RAM as an DDR3 module so will run the test again with Memtest86 (original one) and will see what is happening but I think RAM is fine.

Side note: didn't overlock my system.


here are my needed files (my hardware specs are also in my profile here)

:)

 

ntoskrnl.exe+1640e0 BSOD error

So far, with one memory chip no BSOD. But, getting a BSOD would be random and infrequent.

I've went through that article in the past and still have gotten BSOD.

 

DISM, Windows Reset/Refresh not working.

Faulty RAM can give rise to 'random' blue screens (BSODs).

 

Please upload the zip directly, 3rd party uploaders aren't prefered unless needed and in your case not necessary *Smile
Please read How to upload files

Regarding MemTest86+, you need to run at least 8 complete passes for conclusive results





Diagnostic Test

RAM TEST


Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

 

Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure. Will do the 8 pass memtest86+ when u say it's necessary but here a first my files

 

Uninstall Eset while troubleshooting and use Windows Defender as alternative
How do I manually uninstall my Windows ESET product?ESET Knowledgebase

Code: ffffd000`22bfa6f8 fffff801`d0b2cafbUnable to load image \SystemRoot\system32\DRIVERS\eamonm.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for eamonm.sys *** ERROR: Module load completed but symbols could not be loaded for eamonm.sys eamonm+0x2cafb[/quote] Please try following

• Check your manufacturer for driver updates, update/reinstall the drivers present for Windows 10
• Update TrueCrypt
• Remove Gigabyte software, known for causing bluescreens.
• Update the Creative driversDriver Reference Table - UHSfiltv.sys

After above is done, please run MemTest86+

 

Please try following
1) Check your manufacturer for driver updates, update/reinstall the drivers present for Windows 10
2) Update TrueCrypt
3) Remove Gigabyte software, known for causing bluescreens.
4) Update the Creative drivers

• Driver Reference Table - UHSfiltv.sys

After above is done, please run MemTest86+[/quote] 1) Did check gigabyte.com nothing new. Intel Drive update utility doesen't detect any driver present on my system *Sad
2) TrueCrypt is the newest (working version, 7.2 doesn't to any thing new) version. they stopped their development.
3) Removed all Gigabyte related software (2 of them)
4) Already newest Creative drivers. "The newest versions are already installed on your System".
Attachment 57682

Hope removing the Gigabyte Programs will do it. Otherwise will uninstall Eset and post new log files. Thank you very much for now.