Windows 10: Random internet issues.

Hello,


For about a little over 2 weeks now, I've been dealing with my internet slowing down/dropping at random times. The first 2 days it seemed to be most of the day. Then 2 days only in the evening and now it just happens randomly. Last time it happened was yesterday, right as I was about to call it a day and before that, it was a week ago.


Whenever it happens, I will notice my net slowing down, pings will be all over the place, ranging from normal 10-30 MS to over 1k. Even to my modem. And as time goes on there will also be timeouts, slowing down more and more. After 30 minutes or so usually, can be shorter or longer it will practically be unusable.


I'm on a desktop pc, windows 10. My internet is connected through powerline adapters. However switching to wifi doesn't help, same issues there. Every other device connected to the network works just fine though. It's just my pc.


Things I've tried:


Dns flush/IP renew/Netsh commands/changed DNS server.

Turned off IPV6 and my virusscanner .

Reset my network adapters and changed the power saving mode settings.
Changed my modem to a new one.


None of that had any effect. The only thing I notice is that whenever I restart my pc, my net seems to work for a little bit though it will just randomly here and there too. And turning my pc off for a while I turned it off for an hour SEEMS to fix the issue for that day. Though I don't know if that was a coincidence or not.


These issues started to happen about a week after I updated windows 10 to the 2004 update. But I do not know if that could be the reason?

:)

 

Random BSOD while browsing internet


BitDefender is nothing special. mwac.sys causes BSODs anywhere.
A tiny documentation can be found here: Solved Random BSODs - Windows 10 Forums
In that very thread, the suggested action apparently worked.

The storage and network filters of any third party antivirus can cause BSODs. Neither MBAM nor BitDefender is any special. For a regular antivirus, it may be shifted to an alternative; but MBAM has no alternative. So a clean install of the said program is the most feasible first step.
As far as the first step is not failing, it is better to not think for the second step. Because the BSODs are not universal, failure at the first step is not universal; and success at the second step is also not universal.
That is why I posted that my suggestion may work, or may not. Let us see where it goes.

 

Internet issues with Windows 10

Hello Bryan,

We are sorry to know that you are facing this issue. We'll certainly assist you with this.

Share this information to assist you better.

• Have you made any recent changes prior to this issue?
• Have you installed all the pending updates?
• What is the exact error message or code you receive?

I suggest you to follow the steps below and see if it helps:

Set Internet Explorer as default browser

I suggest you to set Internet Explorer as default web browser and restart the computer and see if it helps.

Disable Proxy

Sometimes using proxy to connect to the internet may cause issues while connecting to the network.

Follow the steps below to disable proxy:

• Press “Windows Key” + “R”.
• Type “inetcpl.cpl”.
• Go to Connection.
• Click on LAN Settings.
• Check the box which says Automatically detect settings.
• Uncheck the box under Proxy server.

Run Internet Connection Troubleshooter

Though you are able to use internet, there could be some problems or some settings which could have stopped Windows services to connect to the internet.

I suggest you to run the Internet connection troubleshooter to fix such issues, follow the steps below:

• Press Windows key + R
• Type Control
• Click on Troubleshooting
• Click on Connect to the internet
• Click on Next and follow the On-screen instructions

Hope this helps, get back to us if you need further assistance.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.