Windows 10: Random shut off of USB/bluetooth devices.

I have a Dell Aurora R6 running on Window 10 that would experience random disconnects from USB devices/bluetooth devices without warning. These are things that I have done to try to mitigate the problem to no avail:

1) disabled allowing the computer to shut down USB ports to conserve power or going to sleep.

2) uninstalled/reinstalled/updated device drivers for the USB root hub, HID devices, bluetooth etc.


I had been in contact with Dell and they had ran diagnostics on the hardware and found no issues. They replaced the motherboard because I have video recording of this issue recurring. The frequency of the USB shut offs have been increasing in frequency and the only thing that temporarily stops this is when I partitioned and and did a clean reinstall of Windows 10. However, over time, the issue would recur. I have done 2 fresh installs of Windows 10. The peripherals work when the computer is booting, just not when I get into the Windows screen. The USB ports that also supply power will also continue to supply power but will not provide any input to the computer. All ports, front and back would not be recognized.


It seems that after the clean install , once Windows 10 updates, the issue would begin to resurface.

Turning off the computer and unplugging the power supply, and then restarting the computer and resetting the BIOS to default would always bring the USB devices back to usable/recognized state in Windows, but the same issue would recur over and over.


I have to constantly reinstall Windows for this to go away and this really interferes with how I want to use the computer be it work or gaming. The USB ports DO NOT temporarily lose power, but rather they will not come back to power/recognized state and are dead until the above steps are taken.

Please advise what is the root cause to this issue or what can be done to fix this issue.

:)

 

I don't have any bluetooth devices but windows turned it on!!

1. I have no bluetooth devices in devices manager.
2,3,4. they all turned off before.

reboot or shutdown doesn't solved it.
i have USB wireless Mouse/Keyborad. i plug it out and use PS/2 but nothing.
i used DISM to repair image.

i tried everything but its not make any changes and windows still showing Bluetooth turned on.
a few days ago it was not even showing Bluetooth in Action Center but i don't understand what happened, no devices added or changed in my PC, no software Installed or Uninstalled, not a single Settings Changed in Windows or BIOS!!!

 

Bluetooth USB Dongle

Ok so here's a question. I had a revelation today that: "Duh, my keyboard/mouse is bluetooth, shouldn't that be the same thing?" My goal here is to get my new Motorola HT820 bluetooth headphones to work with on my computer.

Keyboard/Mouse is Logitech MX5500 Revolution, bluetooth wireless, came with a USB dongle that they connect through. I tried today to get the headset to work, and it won't receive sound. I can get it "connected," but with complications. I'm using Windows XP, have Setpoint 4.7, and I've tried the following:

-Changed the radio settings to a bluetooth hub instead of locked to the keyboard/mouse.

-Clicked "Connect Other Devices."

- Paired headphones with windows. Windows connects correctly, the device reads connections, windows shows it as "already connected" when I try to connect it again. I click on Control Panel -> Bluetooth Devices, and I see the "Motorola HT820" listed as "Passkey enabled," but it doesn't say "Connected" like the keyboard and mouse do. Also, audio does play on the headphones.

-Click on Properties on HT820, and then on services, it does not show any services at all.

- Searched around google, logitech, motorola websites & forums to answers or help, nothing. Closet I got was logitech's "Bluetooth FAQ" which has the following paragraph (http://www.logitech.com/lang/pdf/bluetooth/bluetooth-faq.pdf):

"3.6 How do I listen to music wirelessly with a Bluetooth headphone?
All you need is a Bluetooth headphone and a media player such as iTunes or Windows Media Player 10. For optimal results, it is recommended you use a headphone with Bluetooth 2.0 Enhanced Data Rate, to benefit from the maximum bandwidth (up to 3Mb/s).
Please refer to our online "How To" documents for step-by-step instructions related to your specific device (www.logitech.com/bluetooth/howto)." [That link transfers you back to the same pdf document - it's a circle]

-I tried to install latest Widcomm stack from broadcomm's website, but it says it's not compatible with this dongle.

-Called Logitech Tech Support - got a total jerk girl who straight up said "No i can't help you." And then wouldn't give me the time of day after that.

I've read on threads on Logitech forum that people are using this headset with logitech dongles. Any help getting this connected? I just don't want to have 2 bluetooth dongles connected when I rly only should need this one. Otherwise I guess I'll just purchase one of the ones above, and use that to connect my keyboard, mouse, and headphones all in one swoop.

Sidenote: anyone have experience/knowledge with behavior when 2 bluetooth USB dongles are connected to the same computer?

 

I don't have any bluetooth devices but windows turned it on!!


Then if they are still on, try some of these steps listed below, Not all of these steps may not apply, but, step #2 and #4 should help. I have all 4 steps on myself.

1 Go to Device manager and DISABLE Bluetooth, Do Not remove!
2 Turn USB suspend off
3 Set Hard Drive or SSD to Never
4 Turn Link State Power Management off
Settings 2 thur 4 can be found in your Power Management Settings.
Then click on "Change settings that are currently unavailable"
Then Reboot your Computer. This does work, may come back if you shut OFF your computer,then turn it back on, if it does, just a reboot will turn it off again.