Windows 10: Random USB Warning

I randomly see this warning just about every hour or so. I never connect or disconnect USB devices. How do I find out what this device is?**** moved from german to english Community ****

:)

 

Random BSOD while browsing internet


BitDefender is nothing special. mwac.sys causes BSODs anywhere.
A tiny documentation can be found here: Solved Random BSODs - Windows 10 Forums
In that very thread, the suggested action apparently worked.

The storage and network filters of any third party antivirus can cause BSODs. Neither MBAM nor BitDefender is any special. For a regular antivirus, it may be shifted to an alternative; but MBAM has no alternative. So a clean install of the said program is the most feasible first step.
As far as the first step is not failing, it is better to not think for the second step. Because the BSODs are not universal, failure at the first step is not universal; and success at the second step is also not universal.
That is why I posted that my suggestion may work, or may not. Let us see where it goes.

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

random restarts

Hi,

If a Windows computer random restarts, the device usually have some damaged system components. For us to provide an accurate solution, we would need you to answer the following questions:

• Which build, version and edition of Windows is installed on your computer?
• What changes have you made to the device before this issue occurred?
• What troubleshooting steps was already performed to your laptop?

In the meantime, it will be best to make sure that the latest update of Windows is installed on your device. If the same issue happens after installing Windows Update, we suggest running the power troubleshooter. To do so, follow these steps:

• Open the Control Panel.
• Using the search bar at the upper-right corner, type troubleshooting.
• From the search results, click on Troubleshooting and then select System and Security.
  
• Click on Power and then follow the prompts to successfully run the tool.

We are looking forward to your response.