Windows 10: RAW file system USB can not be recovered

Hello everyone! Please help me out!So I have a Kingston USB 3.0 32GB. I used Ventoy to create a multi-boot USB. But after the program ran successfully, the USB could not be accessible: "You need to format the disk in drive F: before you can use it"I checked the status in Disk Management; it showed that the file system type of the USB is RAW. The Explorer cannot format the USB so I have looked for some solutions on the Internet and these are what I have tried:- I changed the USB from port 1 to port 2 and then to port 3 ... but the error still occurred, I even plug the USB into another laptop so

:)

 

USB 3.0 drive shows RAW for file system. How can I recover my files?

I've tried multiple USB ports and different computers. Windows cannot do anything with a RAW as file system. I need to recover my files without formatting etc.

 

Recover data from a RAW partition

I think you should mention that which file system you used. As per of my experience I suggest you Remo Recover utility to recover data from old hard drive. I think it will be helpful for you.

 

Unable to recover corrupt SD card/RAW file

Hi StrainedVase852,

When a drive is in RAW status, it means that the drive is not ready to be explored or accessed by the operating system. To save the data on the RAW drive, you can first recover them with the free data recovery software on the market. However, if there's
no important data on the drive, you may proceed with converting the RAW drive in another way (Since convert is a command that does not work on RAW drive, you need to turn to another command, format.):

1. Type command prompt in the search box, right-click the best match and run it as administrator.
2. Type the following the hit Enter: format F: /fs:fat32 (Note: F is the drive letter of the RAW drive)
3. Press Enter again.
4. Specify the partition label if you want to. It takes around twenty minutes to format a 32GB SD card.
5. Exit command prompt.

Let me know how it goes.