Windows 10: rear paper source not available Windows 11

On Windows 11 the print command does not show paper source rear paper feed or source for my Epson WF-3520. It was working fine on old computer with Windows 10. How can I get this feature back?

:)

 

Changing paper source when printing.

Hi,

I am Ganesh Gandhi, an Independent Advisor, 18 years experienced windows guide. I am here to work with you on this problem.

Since you were able to do it a couple times but it took so long means you need to reinstall the printer to fix this issue.

Kindly follow these steps:

In Start, search 'Control panel'

In Printers section, remove Canon - TR8520.

If you have installation Media, you can use it.

or

Download latest driver for Canon - TR8520 from:

https://www.usa.canon.com/internet/portal/us/ho...

As in your Manual,

As usual you can select the paper source

From the Paper Source list on the Main tab, select the paper source that matches your purpose.

Automatically Select

Based on the paper settings in the printer driver and the paper information registered on the printer, the printer automatically determines the paper source and feeds paper.

Rear Tray

Paper is always fed from the rear tray.

Cassette

Paper is always fed from the cassette.

Do let me know if you require any further help on this. I will keep working with you until it's resolved.

______________________________________________

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information with reference. Thoroughly research products advertised on the sites before you decide to download and install it. Watch out for ads
on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products).

 

Changing paper source when printing.

When printing how do I change the paper source from rear tray to cassette and from cassette to rear tray? I've tried over and over in different ways. I was able to do it a couple times but it took so long that I don't even know what I did.

 

HP 400 Laser Printer-duplex and paper size errors

Hi Norma,

My name is Erik. I'm an Independent Advisor and I'll be glad to help you today.

Kind ly see this link for HP-supported paper size:

https://support.hp.com/ph-en/document/c03303423

Try this following steps to fix the issue

Step 1: Adjust the paper size setting

Check the paper size setting to make sure it matches the paper you want to print.

1. In the program, you want to print from, click File, and then click Print.

2. Make sure your printer is in the Name or Printers drop-down list box, and then click Properties, Printer Properties or Preferences, depending on the program options.

3. Click the Paper/Quality tab.

4. Click Advanced, if necessary, and then click Paper Size.

5. Select the paper size that matches the size and type of paper loaded in the printer tray, and then click OK. If there are no matching paper sizes, select the size from the list that is closest to the size of the paper loaded in the tray.

6. Click OK, and then try to print.

If the error message persists, continue to the next step.

Step 2: Check the paper source setting

Remove and reload the paper in the input trays, and then check the paper source setting.

1. Remove all the paper from all the printer input trays.

2. Reload the paper, and then adjust the paper width guides so they gently rest against the edge of the paper stack.

3. In the program, you want to print from, click File, and then click Print.

4. Make sure your printer is in the Name or Printers drop-down list box, and then click Properties, Printer Properties or Preferences, depending on the program options.

5. Click the Paper/Quality tab, and then click Paper Source to select the correct tray.

6. Click OK, and then try to print.

If the error message persists, continue to the next step.

Reset the printer to clear any hardware issues or error states.

1. With the printer turned on, disconnect the power cord from the rear of the printer.

2. Unplug the power cord from the wall outlet.

3. Wait a minimum of 60 seconds.

4. Plug the power cord back into the wall outlet.

5. Reconnect the power cord to the rear of the printer.

6. Turn on the printer.

7. Wait until the printer is idle and silent before you continue.

I hope this helps! Please let me know if you have any further concerns.

Regards,

Erik

Independent Advisor