Windows 10: reconnect network drives

I have a NAS box that provides three network drives X,Y,Z at 192.168.1.24if its not abvailable at start up the drives dont get connected. I have a batch file as follows that connects them if I run it when the NAS is on;@ECHO OFF net use * /d /yECHO reconnectingnet use X: \\192.168.1.24\documentsnet use Y: \\192.168.1.24\medianet use Z: \\192.168.1.24\backupsECHO if asked for username and password ECHO its admin and adminPAUSEHowever as you see it starts by disconnecting EVERYTHING.Is there a way I can just do a net use ... /d /y that will only disconnect to the shares on the NAS box?I dont und

:)

 

Hard drive/ OS issue

a guy suggested :

• shutdown
• unhooked HDD
• restarted
• yay !!
• reconnected HDD
• restarted
• yay !!

also , try method 3
How do I unlock the drive where Windows 10 is installed?

 

Mapped Network Drive Disconnects and Will Not Reconnect

OS:Windows 10 V20H2
PC: Dell XPS8940
Router: Netgear R7000 w/ TomatoUSB

• Nine of ten mapped network drives on my desktop PC behave normally! The tenth is a problem. It is mapped to the USB drive connected to my router.
• Sometimes (days) I cannot connect to this mapped drive and it fails to reconnect. At that point I can still connect to this drive from ALL other devices on my Workgroup LAN. None of those devices have the drive mapped!
• For a short time, using "Net Use" shows the drive trying reconnect. Later it says "Disconnected".
• The only way I have found to reconnect to that drive is to perform:
  1. net use U: /delete
  2. net use U: \\HARENET-HD\data
• This problem has started within the last several months. Maybe it's related to a Windows update??

Help would be appreciated!
Jim ;{)

 

How do I reconnect my file history drive

Hi Mattie,



I realize the inconvenience you are experiencing with Windows 10. I will certainly help you.



This issue might occur if File History drive has been disconnected for too long.



I suggest you to follow the steps below to reconnect the File history drive.

Reconnect your File History drive:

• You’ll see this message if your File History drive has been disconnected for too long. If you’re backing up to an external drive (such as a USB drive), make sure that it’s connected to your PC. If you’re backing up to a network location, go to
  Settings > Update & security > Backup and reselect the network.
• After you’ve reconnected, wait for the next scheduled backup or start a backup manually by selecting
  Settings > Update & security > Backup > More options > Back up now.

Please get back to us with an update on issue with reconnecting File History, we will be happy to help.



Thank you.