Windows 10: Recovery Media Setup

Stuck in a loop from "hello there" during an attempt at a recovery media set up via usb


I have tried getting the opportunity to reboot through shutting down 3 times with the power button, I have also tried shift + power button, and just simply using the power button.


dell xps15 windows 10


Please help. Not a techhy expert so please excuse the lack of knowledge, thank you.

:)

 

BSOD Recovery Media Fails

Hi,

This issue might have occurred when the boot files are missing or corrupted.

I suggest you re-built the boot record by following the below commands and check if it helps.

You will have to use Windows 10 installation media to follow the steps to boot into Recovery Environment and try to rebuild BCD.

Step 1: I suggest you to create an installation media for
Windows 10 using the media creation tool:

Installing Windows 10 using the media creation tool

Step 2: After preparing the installation media, insert it hard reboot the device and follow the below:

• Boot into Windows Recovery Environment using the Windows 10 installation media.
• Click on Repair your computer.
  
• Click on Troubleshoot and in the Advanced options.
• Select Command Prompt. Type the following commands into the prompt and press Enter key after each command.
  • bootrec /fixmbr
  • bootrec /fixboot
  • bootrec /scanos
  • bootrec /rebuildbcd

5. Restart the computer.

NOTE: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft
cannot guarantee that any problems resulting from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

Hope it helps. Reply to the post with an updated status of this issue for further assistance.

 

Missing Recovery Environment

Hi Alan,

Here is a link containing several useful suggestions to help you recover Windows 10. Since the error message that you got tells you to insert your Windows installation or recovery media. We suggest the perform the steps listed under
Use a recovery drive to restore or reset your PC or you can also follow the steps under
Use installation media to restore or reset your PC. Please see the link below for more details:

Recovery options in Windows 10.

Regards.

 

windows recovery loop

Hi,

Please answer these question to assist you better.

Are you able to Windows recovery environment?

I suggest you to create a Windows 10 installation media and perform a Startup Repair on the device and check if it helps to resolve the issue.
This is an alternate way to boot the device and run recovery tools when something goes wrong with the Operating system.

Please follow the steps below to do Startup repair:

Steps:-

• • • • • 
          Insert the installation USB drive
          and boot Windows 10 from it.
          
          If you don't have one, you can Create an installation Media.
          
        • 
          In the ‘Windows setup’ page select the ‘language to install’, ‘Time and currency format’
          and the ‘keyboard or input method’ and click on ‘next’.
          
        • 
          Click on ‘Repair your computer’ and select ‘Troubleshoot’.
          
        • 
          Click on ‘Advanced options’ and select ‘Startup Repair’
          and select the operating system.
          

Do let us know if you are able to boot to desktop. Thank you.