Windows 10: Recurring ntoskrnl.exe crashes and BSODs on a new PC with random BugCheck causes and...

AVE...


I have a constant problem with running Windows 10 on a new PC. First crashes were caused by faulty PSU, but I replaced it already. Other components CPU, GPU, motherboard, SSD, RAM are brand new. I have two old hard drives too, but I use them for storage only.


I have random BSODs with random BugCheck errors, all indicating the culprit to be ntoskrnl.exe with address 3f5780. No matter what I do, I can't avoid BSODs 3-5 times a day. Things I did:


1. DISM and SFC, multiple times. Found some corrupt files on two occasions, fixed them, no results.

2. Driver Verifier #1, found problems with ene.sys Gigabyte RGB Fusion and related bloatware. Cleared it all out and removed offending file. Didn\t work.

3. Driver Verifier #2, this time it was AmdTools64.sys, removed all amd*.sys files just in case. Didn't help.

4. Driver Verifier #3, Avast VM driver sys file this time. At that point I decided it's not the drivers, it's something else.

5. I ran MemTest 86 on my memory which is overclocked by XMP profile. No errors. Also state of overclocking has no effect on the BSODs.

6. I checked temperatures, ran AIDA64 stability tests, ran Fumark test on GPU, no problems with that since PSU was replaced.

7. Last night I ran Media Creation Tool to overwrite the entire OS. I had 3 BSODs since, including one while writing this.

I had following BugChecks as shown by BlueScreen View:
0x0000003b 00000000c0000005, fffff8056b0087de, ffffc58c841def40, 0000000000000000
0x00000001 00007ff9f8a0c074, 0000000000000000, 000000000000ffff, ffff8707`88461b80
0x00000139 000000000000001e, ffffdd09f7f28f50, ffffdd09f7f28ea8, 0000000000000000
0x00000139 000000000000001e, ffffcb0f5f40cf50, ffffcb0f5f40cea8, 0000000000000000

All logs, minidumps and last memory dump file are here:
https://drive.google.com/file/d/1dL6jaLUunthZNOxaFSTEAC2VT5g4iNaj/view?usp=sharing

:)

 

Random BSOD (Windows 10) ntoskrnl/0x00000124 bugcheck


Been getting infrequent BSOD errors on my Windows 10 PC (Home edition).

I had a look on BlueScreenView, seems like a lot of the bugcheck BSOD is ntoskrnl related but I can't work out if it's hardware related or some bad driver somewhere.

• The computer is 9 months old, custom built gaming PC.
• Temperatures are low <60C at load, <30C at idle (waterblock cooling on CPU)
• System is stable when gaming, a lot of the BSOD is happening at idle. (I leave my PC running all the time)
• The OS was upgraded from Windows 8.1 to Windows 10 in late 2015.
• System felt more stable under Windows 8.1, not really experienced many BSOD under Win8.1
• I have tested the memory with 10 successful passes (12 hrs).
• Have run DirectX diagnostics and cyclic Heaven/Valley benchmarks - no crash.

 

Ntoskrnl BSOD

• Update your Realtek audio driver.
• Update your computer.
• Disable overclocking settings.
• Turn off BlueStacks/ another Android emulator.
• Clean your registry.
• Check your disk for errors.
• Fix bad memory issues.
• Remove faulty sticks of RAM.
• I hope these methods help you!
• Regards,
• Lewis
  
  * Added by Moderator: Information from
  https://windowsreport.com/windows-8-bsod-ntoskrnl-exe/
  
  * Moderator note: Advice given on this page might or might not be safe and/or effective but there are programs usually classified as PUP's (Potentially Unwanted Programs) being pushed that should not be downloaded or installed.
  

 

BSOD ntoskrnl..exe+1b35e0

Hi, KirbyBakken

My name is Maritza and I am an Independent Advisor. I would be happy to help you today.

Check this link, I hope it helps

https://www.thewindowsclub.com/ntoskrnl-exe-hig...

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised
on the site before you decide to download and install it.

Let us know if these steps help you to resolve the issue.