Windows 10: REinstall/REactivate SMBv1

I use Winows 10 Pro computers with SMBv1 to share files between Linux devices since years ago.Since few weeks we can't use anymore SMBv1we try to reactivate and reinstall without successHow could we reuse it to be able to copy/paste files ?PS: these both server are not connected to internet net work, no automatic update. they are alone just connected together.I already test without success :How to detect, enable and disable SMBv1, SMBv2, and SMBv3 in Windows Microsoft LearnGuidance for troubleshooting SMB - Windows Server Microsoft Learn

:)

 

SMBv1

My understanding is, if i perform a clean install of windows 10 after the fall creators update has been released SMBv1 will not be reinstalled. Do I have to perform a clean install or will the recommended "Fresh Start" remove it as well?

 

How to reinstall and reactivate Windows 10 with an OEM license

Before you continue, I suggest you remove the bloatware by the Control Panel and uninstalling the junk. That is faster and easier, with less potential for problems, but the steps for reinstallation are as follows:

Before you do anything, backup valuable data, if any, on some form of media (i.e. USB) so you can move it onto the reinstalled Windows.

1. Download the appropriate ISO file from Microsoft and burn it to a CD or use it with a bootable USB.
   
2. (Optional if you have no internet) Download all the appropriate drivers for your machine and save them on media for later access.
   
3. Locate the product key on your machine. It is usually under the laptop on a sticker, and if not, use special software to locate it. This will be used during the reinstallation. Note that PCs sometimes auto-activate if it is in the BIOS so this step is not needed if this is case.
   
4. Boot from the bootable media (disc or USB). Continue as usual through the installation, and when the partitions screen comes up, format the current Windows partition and install in there. (The Recovery partition can be deleted, but I recommend keeping it so if anything goes wrong you can restore to factory settings). If the key doesn't work you may need to contact Microsoft and activate over phone.
   
5. After installation, install the drivers and run Windows Update and you're done.
   

 

how to activate SMBv1

Our server still uses SMBv1 for file sharing and mapping. Windows no longer supports SMBv1. How do I apply SMBv1 on a Windows workstation.