Windows 10: Reoccurring BSOD error

I'd love some help diagnosing what is causing a weekly BSOD on a new laptop. Here's a couple of the BSOD dumps for review. These surface as power management problems, but I suspect its a driver issue, but I don't know how to dig into these dumps to figure that out.BSOD Examples.zip

:)

 

Reoccurring BSOD's relating to bugcheck 0x1a

First time posting, so sorry in advance if I missed a thread policy. This started when I upgraded my rig from a i5 6400 to a Ryzen 5 3600. This also included a new Mobo to suport said cpu. Apart from the torturous 12 hours of errors setting up the system. Once I had it all setup I kept getting these BSOD's after some usage time. After using bugcheck and checking forums, most evidence pointed to the newest nvidia drivers and my crucial mx300 m-sata ssd both causing driver errors. I replaced the SSD, and reverted to the default nvidia driver, and the symptoms stopped showing for a while. This was until Memory_management BSOD's started showing up after I close any game. I read online that Nvidia knew about the errors with their current drivers and were rolling out a patch in the recent update, so i manually installed that driver. This still hasn't fixed the problem. Currently, my computer will work fine until I am either playing or closing a game, which it will then BSOD with different errors each time, but the most common two are System-Service-Exception and Memory_Management. Here is a screenshot of my event viewer:




Troubleshooting Steps I've Done:

• Updated CPU and chipset drivers, both from Mobo website and AMD website
• Updated BIOS to the latest version listed on MSI website
• ran 2 memory tests (one was memtest, the other was a stability test in windows, forgot the name) both finished clean
• installed, removed, and reinstalled nvidia drivers
• reinstalled windows 10
• rubber ducky debugging

I've looked at multiple forum posts online, but none seem to have my exact symptoms so maybe I'm missing something. Thanks in advance for any help! (log files attached)

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.