Windows 10: repeated BSOD even after replacing 100% of component

Hi everyone,situation is this:I had my old system for a while, then i decided to update the gpu and monitor to a evga2080 and a monitor benq p3200u.The system got progressively unstable, especially under low loads normal browsing with firefox and/or chrome. I struggled to repair it and got it to check to a locar repair shop but error was not reproducible.Got the system home, made a fresh reinstall from a complete scratch and problems gradually ramped up to crytical levels again over a a few months.Since the system was getting quite old anyways, I decided to build a new one a year ago: that's

:)

 

Wont shutdown 100%

Hi,

This issue may have occurred due to some broken system file components. To help you on this, we suggest that you reset and restore all default power plans to its default settings. Please follow the steps below:

• Open Command Prompt as an administrator.
  
• Type powercfg –restoredefaultschemes and press
  Enter.
  
• Restart your device to apply the changes.

Let us know how it goes after performing the suggested steps.

 

BSOD on startup repeats

Ok so I just built my brand new computer which included replacing every part but the hard drive. Upon startup I get the BSOD screen saying "system thread exception not handled" and in parenthesis I see "AODdriver2.sys. I can only access safe mode since
the BSOD loops. I tried going to my display adapter and updating it but that didn't work since I already had the latest update. Despite having an RX 480 in the system my display adapter was listed as "windows basic display adapter". Can anyone help me with
more steps. Btw whenever I click on "update and security" in the settings menu nothing happens and I get returned to my desktop which I found peculiar. Anyways thanks for anyone help.

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile