Windows 10: Repeated Crashes automatic reboots and WHEA Logger Errors 7800X3D / B650M – Tried...

System Specs CPU: AMD Ryzen 7 7800X3D stockGPU: NVIDIA RTX 5070 TiMotherboard: Gigabyte B650M Gaming Plus WiFiRAM: KLEVV DDR5 32GB 2×16GB CL30, 6000 MHz – also tested another kitPSU: InWin 750W GoldOS: Windows 11 fully updated, fresh installs performed multiple timesStorage: Several SSDs not the crash source My PC randomly reboots during gaming or other demanding tasks. Sometimes it happens within 5–25 minutes, occasionally after 1–2 hours. There used to be a BSOD, but i reinstalled as windows 11 was on 10 and now its just a hard reset. I’ve tried nearly everything and continue to ge

:)

 

WHEA-Logger EventID 17 Repeating Error

Commonly the device ID is a device that shares resources with another device, have you checked in msinfo32 under Hardware Resources > Conflicts/Sharing if this is the case? If this is the case, the device's drivers that it is sharing with should be updated or reinstalled instead.

I have the same device which shares resources with the USB controller.

 

Error WHEA Logger ID1

I have an unrecoverable hardware error with WHEA Logger ID1

 

WHEA-Logger Error 19

When I installed the January 2018 cumulative update, I started getting consistent WHEA-Logger errors about every 60 seconds. Here's what's in the event viewer:

A corrected hardware error has occurred.

Reported by component: Processor Core

Error Source: Corrected Machine Check

Error Type: Internal parity error

Processor APIC ID: 2

I also started getting random blue/green screen crashes. I did a system restore to before the update, and everything went back to normal: no logger errors and no crashes. I waited for the next cumulative update (KB4058258), then installed that figuring that
the problem would be sorted out.

Nope. The logger errors are back. The system hasn't crashed yet, but I'm living in dread. Looks like I'll roll back to the pre-January state so that I can keep working without fearing for loss of data.

Does anyone know a fix/workaround for this? Please don't suggest doing clean Windows install or a reset. In addition to making a mess of things, it's not relevant. This is simple: remove the update and the problem goes away. Apply the update problem comes
back. It's the update. It's not my Windows installation. Thanks!