Windows 10: Replace wifi7 card in asus b760M-A mb

I have asus b760M-A wifi motherboard, it come with wifi6 card AX201, i install intel i5 14400 cpu, may i ask if i can replace the wifi m.2 card with BE200 i want to upgrade it to wifi7. Any advice is welcome.Quite confuse with cnvi standard.

:)

 

WiFi7 MLO Link

Hello Experts, Recent preview release(Version 26100.712) says it has WiFi7 Support available, but I am trying to setup MLO link with BE200 cards, it never starts MLO mode and instead connect with one link only at a time.

I have also update driver for BE200 Intel cards with recent newer version. Is there anything I am missing about new preview release 24H2 26100.712 that have to be configured to start WiFi7 MLO support?

Thanks.

 

ASUS Motherboard compatibility


My Asus MB (M4A89GTD PRO/USB3) is about 5 years old. I have successfully upgraded from Win 7 Pro to Win 10. However, running on Win 10 my PC frequently locks up and has to be re-booted. As a result I down-graded to Win 7 and now all is ok. ASUS does not include this board in the list of Win 10 compatible boards but they state that it might achieve compatibility in the future.
I would like to avoid purchasing a new board and removing/replacing my existing board. If there is no way to make my existing board work with Win 10 could you suggest a good replacement AMD board - I am not a gamer.
Any one got a good suggestion.

 

Replace video card in Windows 11

How do you replace a video card in Windows 11 if you have no video output, due to not being able to install the card's drivers until the card is installed, and there are no onboard graphics on the mobo?

Here is what I've tried so far:

• Disconnected all other peripheral devices(except monitor, of course), then booted with only the replacement card physically installed
  ,
  
• Re-installing the old card along with the replacement card and installed the drivers for the replacement card, then uninstalled the old card via Device Manager and physically removed it and left the replacement card installed. But, when I boot the machine the monitor tells me it couldn't detect any HDMI signal.
  
• Tried using the VGA port of the replacement card, but got the same result(monitor tells me there's no VGA signal)
  
• In all cases, checked to make sure the monitor was configured for the specific video output
  
• Removed and reinstalled CMOS battery, then tried to boot with only the replacement card installed
  

My mobo is a Gigabyte B450M DS3H WIFI rev. 1 with the latest UEFI upgrade installed(66b).

My APU is an AMD Ryzen 5600X.

Any suggestions will be greatly appreciated. Thanks in advance.